Gday,
I am a novice at auto electricals. I was wondering whjat sort of tools - connections were required to wire up a suzuki sierra during a gti engine transplant... The donor car I bought comes with a loom, fuel pump ecu and computer, so what sorts of odds and ends will I need ?
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tools required for an engine conversion (wiring)
Moderator: -Scott-
If you need to ask this question than i think a engine rewire could be outta your league. but thats the quickest way to learn. Ive been there and tried ( and broke stuff) that.
It all depends on how you wire it up. Min is cutters,soldering irion , solder, tape, heatshrink, testlist/ voltmeter, Wiring diagrams,
Good luck. Im sure there are a few willing to help.
It all depends on how you wire it up. Min is cutters,soldering irion , solder, tape, heatshrink, testlist/ voltmeter, Wiring diagrams,
Good luck. Im sure there are a few willing to help.
Who is online
Users browsing this forum: No registered users and 4 guests