Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine Mount
Moderator: Tiny
Engine Mount
I am after an engine mount or set to suit a 91 300 series feroza . The drivers side is broken but local suppliers are telling me they will have to be imported from overseas.Anyone know of a suitable replacement or a Australian supplier.Tks.
At least two companies make them IIRC. Mackay and KelPro??
Any Repco or other auto accessory place should be able to get one for you. I ordered one about six months ago and it had to come from interstate, but I'd find it hard to believe there are none in Australia.
If it's any help the left and right front mounts are supposedly the same item. Have you also tried Daihatsu? Sometimes their prices on genuine parts aren't that bad.
BTW here's a link from the FAQ : http://www.mackaycon.com.au/engine%20mount_web.pdf . There's other info in there too on engine mounts.
Any Repco or other auto accessory place should be able to get one for you. I ordered one about six months ago and it had to come from interstate, but I'd find it hard to believe there are none in Australia.
If it's any help the left and right front mounts are supposedly the same item. Have you also tried Daihatsu? Sometimes their prices on genuine parts aren't that bad.
BTW here's a link from the FAQ : http://www.mackaycon.com.au/engine%20mount_web.pdf . There's other info in there too on engine mounts.
David
Just got 2 a coupla weeks ago from Repco in Melbourne. They apparently buy theirs from Mackay Industries, and had to wait about 6 weeks for mine.
Stupid thing is, it was cheaper from Repco @ $69.99 each than Mackay or their listed dealers. Some wanted up to $130 a SIDE!!!
Engine mounts are the same on both sides, so don't let them get you confused .
Stupid thing is, it was cheaper from Repco @ $69.99 each than Mackay or their listed dealers. Some wanted up to $130 a SIDE!!!
Engine mounts are the same on both sides, so don't let them get you confused .
bru21 wrote:What happens in goat, stays in goat!
Thanks for the info Blokes
I have tried the local autopro and repco without luck .So I think I will contact Myer Industries direct and see what they reckon.
Who is online
Users browsing this forum: No registered users and 4 guests