Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

steerin on 87 lux after lift kit

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 111
Joined: Tue Jan 11, 2005 6:50 pm
Location: canberra

steerin on 87 lux after lift kit

Post by kegz »

hey im jst wondering if you can get away with ust using a flattened u bolt to get a clearance between the drag linka nd u bolt on an 87 ln65 hilux. the one currently fitted it standard and has had an angle grinder taken to it. if not what is my cheapest option to get me out of trouble cheers
Top
Posts: 207
Joined: Mon May 02, 2005 9:37 am
Location: melbourne

Post by YB.LOW4 »

yes i have done this not long ago. all we did was heated the drag link a little and bent it up just a little bit. we just heated it with the oxy then got the jack and jacked it up with a piece of steel on the jack pushing on the heating area. hope this helps
Gu Ute,
Top
Posts: 433
Joined: Tue Nov 16, 2004 6:24 pm
Location: Medowie NSW

Post by HIGH ROLLER »

Yeh mate u can buy the flattened u bolts from most suspension place i got mine from 4x4kotora in newcastle hope this helps ya :)
TEAM PIRATE navi Tuff Truck 2010 Winners!!!!!
Dreaming of getting back to KOH
Top
Posts: 111
Joined: Tue Jan 11, 2005 6:50 pm
Location: canberra

thanks

Post by kegz »

cheers dudes
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests