Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sump seal

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Post Reply
Posts: 44
Joined: Sat Dec 07, 2002 10:16 am

Sump seal

Post by Greazy »

Well i have been backpacking around the world for the last three months and missed the 4WDin very much. Theres hardly any 4WD's through europe but in Ireland and Scotland everyone has an isuzu trooper. But none of them are done up. Good to catch up on the news and u boys have been busy.

I returned home to find my battery has died and the oil leak has now formed a 2ft deep puddle. Its the sump seal. i dont really want to pull the motor out again so i am looking at droping the diff and axle down to get the sump off. Has anyone done this before???? I will do the CV boots and put new joints on as well.

any comments????

Cheers,
Greazy
Life is for my own to live my own way......
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

Welcome back Greazy! :)

Sorry about the late reply. I'm up in Perth at the moment so limited computer access.Was wondering where you had got to... Backpacking must have been a hoot.

My old man and I pulled the front diff out of the Jackaroo a couple of years ago to install the lokka and I can tell you that its a pretty big job as you have to remove most of the suspension components to get to the diff.
Cant give details now but will when I get home to my workshop manual. I imagine the componentry is pretty similar for our vehicles...

Cheers,

Noel
Posts: 44
Joined: Sat Dec 07, 2002 10:16 am

Post by Greazy »

Hey!!
THanks yeh i thought it was going to be a big job. mmmmm U put a locker in?????? that gives me an idea :cool: hahaha. if i was thinking about upgrading my torsions do u reakon it is worth doing it all in one go, while they are all out??? no hurry on the reply i have to pay the bank back alittle before i start playing around with the Jacka again.

yeh Backpacking i saw some really interestin places - got to England, France, Netherlands, Germany, Poland, Austria, Italy, Greece, Spain, Ireland and scotland. one of the highlights was making it to the motoGP in LeMans!!! it was awesome. But i return to find my mates have lifted there cars and got bigger wheels. aaaaarrrrrrrr well........

Cheers,
Greazy
Life is for my own to live my own way......
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

Now you're thinking! :cool:

Would be the perfect oportunity (and excuse ;) ) to whack a locker in there. Do you know which lockers will fit you're diff? Do you have the Isuzu corp 10 bolt?

Noel
Posts: 44
Joined: Sat Dec 07, 2002 10:16 am

Post by Greazy »

Well well, where do i start.

Went out 4wd the other day with some mates the car went well except for oil spittin out the bottom of it and basically no brakes. After washing it down and removing the wheels to inspect the brakes i discovered that my pads in the drum are down to metal and the drum has actually been worn into about 3mm. Which means all new drums for me.......... :cry: very costly i am not very happy at this stage and am tossing up whether or not to just start again on another car????

These machines are fun but they really know how to hurt especially when the bank to already knocking at your door....

Thats my bitching over with.....

i however found some inspriation from the website www.independent4x.com u have probably already seen it but after seeing the beast with the same front grill as mine, well lets just say the wetdreams begun.

Cheers,
Greazy
Life is for my own to live my own way......
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

Sorry to hear of your misfortune Greazy!

Should be able to find some cheapies at the wreckers maybe?

you are allowed to replace the Jack under one condition: That is with another Jack. :D But seriously hope it doesnt turn out too costly for you.

And yes Matt at Independent4x has done awesome things to his Trooper although there isnt much original Trooper there... ;)
If that aint inspiration then nothing is...

Cheers,

Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Posts: 44
Joined: Sat Dec 07, 2002 10:16 am

Post by Greazy »

Well i finally got around to doing it. Picked up two drums from the wreakers in pretty good nick for $25 each, new brake cyclinders and pads for $80 from repco and i didnt have to much trouble putting them back together. My old ones were rooted, it was actully abit scary to see what sort of nick they were in. The only bad part was when i decided to change the fuel filter and got fuel in my eye. shit it hurt!!!! but not as bad as carby cleaner. I also put a stright through pipe on with no muffler. all i have is a resinator right at the back. its got abit more bulls and sounds alot louder now. :cool:

now i have to save for the big job :x

cheers,
Greazy
Life is for my own to live my own way......
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests