Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting 40 series glass guards

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 7
Joined: Tue Apr 26, 2005 3:34 pm
Location: Melbourne

Fitting 40 series glass guards

Post by Diggers »

I’ve recently purchased some 2â€
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

Easiest way I found it to line them up at the front first.
Square them up at the corner which mates to the front panel which holds grill and headlights etc pic will help explain where I mean - red circle. Once you get that first corner right it's a lot easier to line up the rest and work out where to drill from there. Might find there's a bit of flexing to be done..

Something I have found with some guards is the inner guard section is not quite the same dimension as stock..on my BJ the battery tray on passenger side interfered with the guard and was a prick to get it to sit right (enter the grinder) Melbourne? Can give you a hand if ya llike.

scotto
You do not have the required permissions to view the files attached to this post.
www.3rdrock4x4.com
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

Be warned scotto is a man lovin nancy!!!
and he will only make your guards look crooked like his!
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

DIRTY ROCK STAR wrote:Be warned scotto is a man lovin nancy!!!
and he will only make your guards look crooked like his!
Scotto's pic you have been warned :rofl:
You do not have the required permissions to view the files attached to this post.
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Posts: 481
Joined: Fri Jan 16, 2004 2:42 pm
Location: WA

Post by the_smoo »

scary looking mofo... :rofl:
now in Perth
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests