Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rocky Road spoa
Rocky Road spoa
http://www.rocky-road.com/boltonspoa.html
What do people think of this kit?
Know of anyone that has it installed?
Bozz
What do people think of this kit?
Know of anyone that has it installed?
Bozz
I thought the problem with the JPeater was getting hold of YJ springs to fit. Heaps of flex and all, but as YJ did not come out in Australia the springs are rare as hens teeth. Even though OME make them they are not stocked here.
Geoffrey Dick, how have you found this kit? are you running it SPOA or SPUA? What springs did you run? Have you raised the shock mounts too?
Geoffrey Dick, how have you found this kit? are you running it SPOA or SPUA? What springs did you run? Have you raised the shock mounts too?
yj springs very hard to get but i managed to find some in australia. cheap in the USA but freight would be dear. only just put them on, ie.not used yet. need custom shock mounts etc and very long shocks. curently running ome hilux but will go to ranchos b4 i taake it off road. need new driveshafts, because stock too short. running SPOA with 2inch body lift, easilt runs 33 but could run 35's with a bit of panel work. easy to install just need to drill a couple of holes. instructions with the kit are not avaliable which is crappy. any more questions just ask. can supply pictures if you want just specify what kind of pics. i live in belgrave pm me if anyone wants to come and have a look. my next project is to s/c my 1.6 vit engine!
Who is online
Users browsing this forum: No registered users and 0 guests