hi all .
my problem is as follows .
i thort i had a liffter problem after replacing them i noticed the top off two
valves was chewed off to the colets .
would any one know why it has done this ?
could it have been a over time thing ?
or lake off services ie rocker ajustment ?
as i have only had this 4wd for a week i dont know service history .
it is a toyota hilux 3.8 chevy carbie motor .
also the valve seats look good and gides have no play in them .
any info would be great help .
as i dont want to put new valves in and they get chewed as well .
thank you ricky
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
valve problems
Moderators: toaddog, TWISTY, V8Patrol, Moderators
valves
hi
put all new valves in so its going again
.
oil is runing to them fine so hope it was just old valve s .
now i have broke both engine mounts
.
thanks for replys .
ricky
put all new valves in so its going again
.oil is runing to them fine so hope it was just old valve s .
now i have broke both engine mounts
.thanks for replys .
ricky
Who is online
Users browsing this forum: No registered users and 2 guests