Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
whiteknight wrote:did a search but couldn't find a simple answer..
I got a wheel alignment after the Highsteer install and they said I need wedges under the front spring pack.
How do I tell what degree wedges I need?
Should the flat base of the steering arms be parellel to the ground?
What will it improve if I rectify this?
confused
The alignment shop should be able to tell you how much you need, if not, i would find another alignment shop that can.
How wild have you gone with the spring perches and shackles? I had standard perch with a 2" longer shackle and 4 deg is what i had fitted and it came back into spec.
So what is the standard caster on a solid axle 96 Hilux? I'm not sure how to read these properly but it appears mine is currently at over 5degrees? so what caster wedges should I be looking at getting?
