Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Anyone have any pics regardin weld on beadlocks

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Anyone have any pics regardin weld on beadlocks

Post by A1 »

Well as the headin says any pics or links to sites with in depth advice and pics ..............I realise this has been aske recently but im pretty sure there werent any links or pics in this similiar post

I have read the 1 of the posts on pirate in the tech section that has pics but yet not much info really regardin placement and finished wheel without outer ring fitted

Your advice in this would also be great



Dan

the chromys might stay at the shop even though i like the BLING and the look , your opinions have swayed my preference slightly so im checkin out all my possiblitys ;)
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Well found this 1 seems to be the best so far with the actual pics side to giuve sum insight of where they are actually welded :P

http://www.rockstomper.com/catalog/wheels/beadlocks.htm


Has any 1 that has dunn there own beadlocks had any dramas with the trueness of the rim post weldin ?




Gee hey im answerin my own posts :D
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

So i take that as NO then :!: .................................... :arrow: :finger:
Posts: 82
Joined: Wed Dec 04, 2002 6:55 am
Location: Stuck Between a 44 & a 52

Post by onall4 »

Check out this thread. Allready discussed here:

http://www.outerlimits4x4.com/PHP_Modul ... php?t=5214

Pete
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Re: Anyone have any pics regardin weld on beadlocks

Post by A1 »

A1MAV wrote:Well as the headin says any pics or links to sites with in depth advice and pics ..............I realise this has been aske recently but im pretty sure there werent any links or pics in this similiar post

I have read the 1 of the posts on pirate in the tech section that has pics but yet not much info really regardin placement and finished wheel without outer ring fitted

Your advice in this would also be great



Dan

the chromys might stay at the shop even though i like the BLING and the look , your opinions have swayed my preference slightly so im checkin out all my possiblitys ;)



Thanx Pete

Hence the reference to this post u added more after the same kind of link as ther rockstomper site

And if ya posted so i would c that u sell these ,im already aware and u may well be gettin a call soon

Dan
Posts: 352
Joined: Mon Dec 23, 2002 9:10 pm
Location: Sydney

Post by 65Mog »

Try Oz Wheel in Sydney, I'm not sure what his phone number is but he advertised in 4WD monthly up until about 12 months ago, 6mm inner and 4mm outer.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest