Hi I have a 85 seirra and I pulled the dash to clean out the heater.
When I put it back together I turn the head lights on the lights dont work but it lights up the idiot lights on the dash ( hazards, park brake, check engine etc ) and powers up the ignition. When I start it to turn it back of you have to turn the headlights off.
Any ideas were to look? Ive been looking for loose earth wires or cut wiring but am having no luck. Any ideas would be HUGELY appreciated.
Thanks Nik.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ignition playing up
Moderator: -Scott-
Ok I,ve just had another play this is what I,ve come up with.
The parkers work fine when I turn the driving lights on the hazard lights only on the dash light up. Everything else seems to workbut with the car running I have to turn the lights off to stop the motor. Sosome how the ignition and lights are crossed.
Nik
The parkers work fine when I turn the driving lights on the hazard lights only on the dash light up. Everything else seems to workbut with the car running I have to turn the lights off to stop the motor. Sosome how the ignition and lights are crossed.
Nik
Who is online
Users browsing this forum: No registered users and 3 guests