Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how much for a 3.0 L engine

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 61
Joined: Mon Jan 17, 2005 8:15 pm
Location: sunshine coast

how much for a 3.0 L engine

Post by croozer »

I am asking on behalf of my work mate. He has a 92 pajero with a 3L motor that is blowing a lot of smoke, he had someone quote him minimum of $4000 to rebuild i reckon you could pick up a decent 2nd hand one for a hell of a lot less. can someone give me and idea of $$ i would expect to pay for a second hand one or if anyone knows a good place to buy one from, preferably sunshine coast or brisbane.
cheers
Top
Posts: 62
Joined: Mon Sep 20, 2004 11:19 am
Location: Sydney

Post by Locknut »

you can buy the magna 3lt v6 its the same block and heads you just need to change all the bits over from your pajero v6 (they are the same 6g72)
its a bit of work but from wot i have heard the magna v6 is a lot cheaper then then pajero v6....maybe they think that you can afford to drive a 4wd you can afford a lot more for ya parts.........worth a look at any way
Gav
Top
Posts: 408
Joined: Thu Sep 25, 2003 1:21 pm
Location: "Shit"ney

Post by Noisey »

Mine was $3800 to rebuild but I got hidden goodies and a new block. Personally I would not go over $3000 for a standard replacement motor.
When I read about the evils of drinking, I gave up reading
Top
Posts: 728
Joined: Sun Aug 24, 2003 8:46 pm
Location: Canberra (too far from the sea)

Post by twinnie »

err no one mentioned valve stem seals, hence all the smoke no need for a rebuild most of the time right?

Matt
Top
Posts: 61
Joined: Mon Jan 17, 2005 8:15 pm
Location: sunshine coast

Post by croozer »

thanks for that. yeah i thought of valve stem seals and maybe just re ringing it for him. I will look into the magna engine as well see what i come up with
cheers.
Top
Posts: 31
Joined: Mon Mar 20, 2006 9:56 pm
Location: Riverview Ipswich

Contact:
Contact Pajeropaul

motor

Post by Pajeropaul »

yes very tru i just over 12 months ago did a replcement in my 89 pajo 3.0ltr v6 got a reco from repco on the exchange system and it cost me about $3200. plus any other hurdles that came up
89 nf pajero, camping and comfort when away always looking for new things and advice, overhead console, 9550lb winch, hot water sytem 80litres on board water tank, in car sat fone,
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

are those prices fitted ?
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests