Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4wd diff = 2wd diff???

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

4wd diff = 2wd diff???

Post by SAWZALL »

Are they the same diff? Aside from the ratio difference? Same strength?
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Re: 4wd diff = 2wd diff???

Post by Gribble »

SAWZALL wrote:Are they the same diff? Aside from the ratio difference? Same strength?
Different amount of splines for a start, why?
\m/
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

Re: 4wd diff = 2wd diff???

Post by Webbie »

SAWZALL wrote:Are they the same diff? Aside from the ratio difference? Same strength?
I just put a 4.3 outta a 2x4 and bolted straight in the only difference i know of is that the 4x4 is spoa and the 2x4 is underslung.
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

I've got a 4 x 4 housing that is a bit second hand (rust and had a few different mounts over the years). Local wrecker has a 2wd diff and wanted to start with a fresh housing....
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

I thought the 2wd diff had less strength, ie thinner tubes, less bracing
J Top
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

It doesn't look as beefy :(
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests