Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gti Samurai fuel pump query
hey bazooked, went to the local ripco today, offered the part number pn ge 143 in order the see if they had a lift pump, but nothing came up, the only universal lift pump he could find was $203, and i dont think my kidneys are worth that much 
went to a wreckers and he said he could get me a lift pump to supply furl to the vl pump for around $120 brand new, i will keep you guys updated on how it goes, he has to ring me back first.
bazooked do you have a brand for your lift pump?
went to a wreckers and he said he could get me a lift pump to supply furl to the vl pump for around $120 brand new, i will keep you guys updated on how it goes, he has to ring me back first.
bazooked do you have a brand for your lift pump?
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
in this hole thread nobody has used the word regulater. just about every multipoint injected car has a fuel pump with enough pressure, anything over that is returned to the tank. i run a gti engine and started out with the vl pump with inline filter before the pump and no lift pump. made a bit of noise but never let me down. after the ute conversion was done i bought a complete tank from a hyundai scoupe and mounted that between old tank and tray. now the original tank is my reserve and the vl pump feeds into the new tank when getting low on juice. whole thing works a treat!
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
been hearing you can use bluebird low pressure electric pumps aswell for lift pumps, should be pretty cheap to find, but only come in s2 bluebirds i think...
ahh another thing i didnt know bazooked, your just full of info
mr green did you have problems with angles and fuel starvation to the pump with just the vl pump?
ahh another thing i didnt know bazooked, your just full of info
mr green did you have problems with angles and fuel starvation to the pump with just the vl pump?
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
as i was saying , it did get noisey on the big sideways angle but never cut out. oh and bazooked i mentioned the regukater because others where mentioning fuel pump pressures, i'm just saying its not that critical as long as you have enough.
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
well its good to know it still works ok, just dont want to be like my mate with a 4age. was up the west coast of tassie(4 hours drive) and fuel pump shat itself from starvation.
will the lift pump be enough to stop this, or a small surge tank needed...
will the lift pump be enough to stop this, or a small surge tank needed...
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
my humble opinion is if you don't want to spend 2 days buggerising about with surge tanks, lift pumps bla bla bla, juast through a vl pump in. But if you want to croos the simpson with peace of mind fit an injected tank (jimny import sierra etc.)
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
gday all
hey spike sierra, soz I couldnt reply earlier. Bin busy with uni prep...hows your conversion goin mate, mine is getting along slowly, at the moment the only advancement ive made on the fuel system conversion is that ive bought a surge tank for $85. Ive priced the goss pumps suggested by bazooked, and they were about $150 each...so I was going to go to the wreckers and look for a vl pump. Did it all work out for you mate? At the moment Ive been trying to find a way to fit the engine into the bay, mainly the protruding dizzy. Ive managed to find a cap that will fit! It cost me $20 for the rotor button and cap from a mazda gtx. A cheap alternative to the suzisport angle drive for $400
Sorry for getting off track.
Cheers, and good luck!
Beaver
hey spike sierra, soz I couldnt reply earlier. Bin busy with uni prep...hows your conversion goin mate, mine is getting along slowly, at the moment the only advancement ive made on the fuel system conversion is that ive bought a surge tank for $85. Ive priced the goss pumps suggested by bazooked, and they were about $150 each...so I was going to go to the wreckers and look for a vl pump. Did it all work out for you mate? At the moment Ive been trying to find a way to fit the engine into the bay, mainly the protruding dizzy. Ive managed to find a cap that will fit! It cost me $20 for the rotor button and cap from a mazda gtx. A cheap alternative to the suzisport angle drive for $400
Sorry for getting off track.
Cheers, and good luck!
Beaver
my hasnt started yet, just gathering bits and pieces so when i do go for it, it will be back on the road asap, as its a DD.
where did you get the surge tank from?
any piccies?
what are you going to do about a exh manifold?
where did you get the surge tank from?
any piccies?
what are you going to do about a exh manifold?
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Gday
I havent acually got any pics of my conversion. But I know some links which would, I can find them for you...
With the extrators. When I bought the half-cut, it came with the extractors from the gti. And of course because it had a cross engine, the extractors wont fit into the sierra bay. So I am just planning on cutting the extractors near the bend and rotating it 90 deg then welding it up again...
The alternative is to get a custom set... or..
Because the gti engine and the sierra have different flange and gasket patterns this poses a problem. If your old sierra engine had extractors you could cut the flange off the sierra extractors and make up a gti flange to suit the gti engine.
Oh well... hope I helped.
Good luck,
Oh yeah mate, whats your plans for the fuel system?
cheers
I havent acually got any pics of my conversion. But I know some links which would, I can find them for you...
With the extrators. When I bought the half-cut, it came with the extractors from the gti. And of course because it had a cross engine, the extractors wont fit into the sierra bay. So I am just planning on cutting the extractors near the bend and rotating it 90 deg then welding it up again...
The alternative is to get a custom set... or..
Because the gti engine and the sierra have different flange and gasket patterns this poses a problem. If your old sierra engine had extractors you could cut the flange off the sierra extractors and make up a gti flange to suit the gti engine.
Oh well... hope I helped.
Good luck,
Oh yeah mate, whats your plans for the fuel system?
cheers
well with the jimny engine you can use the same headers, thats what im going to do.
with the fuel system, ive got a vl pump, will grab a bluebird lift pump from a s2 bluebird.. see how it goes with that setup, i dont think i will need a surge tank.
with the fuel system, ive got a vl pump, will grab a bluebird lift pump from a s2 bluebird.. see how it goes with that setup, i dont think i will need a surge tank.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... %3AIT&rd=1beaver700 wrote:HRZOOK, The fuel pump featured there is very hard to find...
I have a 1.6 single point on a g13b, and it uses only one vl commodore pump, which is silent, has no pre lifter, and cost 75 dollars from the wreckers, people make the mistake of looking for a vl turbo pump, when the vl commdore pump is exactly the same, part number and all, but you get "turbo vl poofter tax" at wreckers and shops.
On another note my supercharger is supposed to arrive soon
On another note my supercharger is supposed to arrive soon
wire it up to the fuel pump wire in the new loom, they have there own relay built in(well the jimny does) have a look for it on the wiring diagram, the jimny one is pink.
this means the pump will prime when the key is turned to on and then turns on when the pressure drops.
you can use any type of efi fuel filter, i have a universal efi filter, costme around 15 bucks from supercrap.
this means the pump will prime when the key is turned to on and then turns on when the pressure drops.
you can use any type of efi fuel filter, i have a universal efi filter, costme around 15 bucks from supercrap.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Who is online
Users browsing this forum: No registered users and 1 guest