Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Setting Valve CLearances on a 2h

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Setting Valve CLearances on a 2h

Post by Cruzer! »

Hey all, just almost finished rebuilding my motor and havin a issue with setting valve clearance (engine still in car), how and what did you use/do to move the crank to TDC, i can't get a socket big enough in onto the crank pulley to move it?

Thanks
Ben
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

put the fan belt on with good tension on it and spin the fan

if its a viscous style fan put the socket / spanner on the alt nut
Top
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Post by Cruzer! »

yeah viscous fan so ill give the alt a go.

Cheers mate!
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Posts: 810
Joined: Thu Jul 15, 2004 8:02 am
Location: Somewhere in NSW

Post by brighty »

Hmmm, buy a socket that fits :roll: .... thats what I had to do.

* Sorry, I'm in one of those moods!! :lol:
When in doubt..... UTE-ERIZE it!!!
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

When I did it, I fitted a large socket on the crankshaft and tried to spin the 2H engine with a long tension spanner. For the life of me I couldn't get it to turn :x Yes, the glowplugs were out and the gearbox was in neutral. I ended up bumping the starter until the TDC marks were aligned. It was a bitch to get it to line up, but somehow I managed.

Be sure the engine is warm when you set the clearance.

Dave
Top
Posts: 10
Joined: Mon Dec 19, 2005 9:18 am
Location: Brisbane, QLD

Post by jizzyj »

Just done mine. Had to take off the bash plate and put a socket on the powersteering pump. It slipped a bit but I eventually got the marks to line up.

Even if I had a socket big enough for the crankshaft pulley, I wouldn't have been able to get it in between the fan shroud and the block.

Justin
Top
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Post by Cruzer! »

Even if I had a socket big enough for the crankshaft pulley, I wouldn't have been able to get it in between the fan shroud and the block.
That was my problem. Couldnt Get Belt tight enough not to slip either. Ended up using a trick the old fella from next door said, putting the car in 5th and pulling/pushing/towing it till the marks line up - worked a treat.
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Posts: 67
Joined: Wed Jun 02, 2004 1:50 pm
Location: Brisbane

Post by Homer »

Yep great trick putting it in gear if it's a manual
with my auto I ended up cutting a section out of the fan shroud and refitting it with a couple of bolts ....so I can do it easily next time...
and went and bought the 46mm socket required for the crankshaft...nice and easy now
P.S. no glow plugs and injectors are difficult to get to on a 12HT and you just can't spin past that 400psi mark by swinging on alternator or power steering bolts
Scott
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests