I have a 2" body lift in my 80 series and i have blown the radiator that was in the car when i bought it, my mechanic cant seen to work out how it was modified or how to modify a genuine replacement.
can anyone help with some mod details???
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series Radiator mod to suit 2" body kit
Moderators: toaddog, Elmo, DUDELUX
The 2 brackets at the bottom of the rad were replaced with new ones i made that were dropped the same amount as the body lift amount and the top i modded some 75 series top rubber mounts that are similar to the 80 top mount but lended them selves to the drop mount better.
wally
wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
just done this ,but the cheaper way for now.
i chopped the bottom of the rad shroud out ,bottom hose fitted, chopped the top hose in half and inserted a pipe between the 2.
before i get fried... i will be dropping it down soonish..
i chopped the bottom of the rad shroud out ,bottom hose fitted, chopped the top hose in half and inserted a pipe between the 2.
before i get fried... i will be dropping it down soonish..
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
i think i'd prefer your method as it would avoid some mud, and be in line with the cutout of the car & grill if you get what i mean.mud4b wrote:just done this ,but the cheaper way for now.
i chopped the bottom of the rad shroud out ,bottom hose fitted, chopped the top hose in half and inserted a pipe between the 2.
before i get fried... i will be dropping it down soonish..
only thing i dont like the fan being out of sync with the radiator area and shroud.. but if you mod the shroud position a little lower maybe???
Shut Up, Get Out, & Start Digging...
Who is online
Users browsing this forum: No registered users and 0 guests