Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Better lights?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 189
Joined: Sat Sep 11, 2004 9:40 pm
Location: Cairns, Nth QLD

Better lights?

Post by meiamaro »

Posting for a mate!
He has a 80 series,good truck but bad lights.
he's tried differant lights/inserts and globe's, but
still when out at night and you dip your lights
the road dissapears.
He's thinking of converting/modifying it to round lights
instead of square lights, has antone done this.

Cheers Ian.
GQ LWB TD42 Turbo,(ps.water does not compress.)
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

he will get much better results if he just fits spotlights for much the same money and much less stuffing around. Go IPF or lightforce i say
http://www.populationparty.org.au/
Top
Posts: 189
Joined: Sat Sep 11, 2004 9:40 pm
Location: Cairns, Nth QLD

Post by meiamaro »

He has good spottie's.
Its just low beam(no spottie"s)thats the problem.
"Its very dark and scarey up here" :lol:
GQ LWB TD42 Turbo,(ps.water does not compress.)
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

even kitting it with a ipf headlight upgrade

or has he atleast put a relay on his headlights
Top
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Post by Jeff80 »

May sound like a stupid question, but are they adjusted correctly? If they havent been adjusted after lifting the vehicle, they would be too high hence not being able to see the road. If they are adjusted correctly, I would recommend the IPF headlight upgrade just on the outers. Makes a big difference.
" Some days you are the bug; some days you are the wind screen"
Top
Posts: 58
Joined: Mon Jan 09, 2006 10:17 pm
Location: Victoria

Post by coights 40th »

How about fitting a piranha super loom or simular to his vehicle. If you do a check at the headlight plug, some Toyota's don't get a full 12volts to the head lights thus producing a dulled headlight effect. Mine improved by fitting a new loom and it wasn't a hard job! The looms do all four headlights.:)
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

i would do as coight suggested, check what voltage the lights are getting across thier terminals

if its less than 12v fitting a heavier aftermarket loom will improve things alot.

also fitting the IPF or hella H4 lenses with some 100/70 or even 100/90 globes would do the trick.
Top
Posts: 58
Joined: Mon Jan 09, 2006 10:17 pm
Location: Victoria

Post by coights 40th »

Shadow has got a good point with the IPF inserts and larger globe sizes, but it may also help if you have headlight protectors to drill a few small holes in them (generally in the corners) for air flow across the lights. Because of such a small area in the light inserts and larger wattage globes, the extra heat generated shortens the life of the globe, the extra air flow helps extend this life. ;)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests