Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series transfer case

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6
Joined: Mon Mar 29, 2004 8:28 am
Location: Tecoma

80 series transfer case

Post by lance475 »

Any ideas on why my transfer case jumps out of low range under engine braking ?
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

I dunno about 80 series transfers, but in 60/75 series transfers there is a spring loaded detent ball near the hi-lo shifter that should be checked first if the spring has lost its tension. Otherwise it can be worn out splines on the rear transfer output shaft (not the gearbox shaft which is another problem entirely) where it engages the hi-lo shift collar.

Dave
Top
Posts: 6
Joined: Mon Mar 29, 2004 8:28 am
Location: Tecoma

Post by lance475 »

Thanks Dave, I will give the detent spring a try and keep my fingers crossed. Come to think of it that is pretty much what I have been doing on steep descents anyway!
Steve
Top
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

Mine was doing it aqfter i changed treansfer cases. It turned out to be just an adjustment to the arm going from the lever to the transfer case. No problems now
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests