Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

THEMS THE BRAKES OR NOT

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

THEMS THE BRAKES OR NOT

Post by Loanrangie »

The rangie's brake m/cylinder has sh@t itself and even after fitting new seals its still leaking, gonna bite the bullet and go new but they are a bit exxy at approx. $345. I can get one from the UK at about $140 + postage.
Anyone bought one locally for reasonable money ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 884
Joined: Mon Sep 01, 2003 8:59 pm
Location: melbourne

Post by defender kev »

I bought one for my Rangie about 2 years ago and was $185 change over from range-rov in mitcham.
"Why do the British drink their beer at room temperature? Because Lucas builds their refrigerators."
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Have you tried British Motor Imports? We buy most of our Rangie gear from them. Generaly its cheaper than buying second hand.
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

is it similar to one off a 95 disco? if so $100 and its yours.

Andrew.
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Resleeve for abpout $160.00

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Thanks Tony, i sent of a request so i'll see what they come up with.
Andrew the m/c's changed after 85' so unfortunately it wont fit unless i use the booster as well and i dont really wont to go changing everything around.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

i meant $100 including the booster and pedal if you want...

Andrew
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

andrew e wrote:i meant $100 including the booster and pedal if you want...

Andrew
Are you able to provide any pics ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Just got a reply from BMI, nearly fell off my chair - $380+ gst + postage, so they can go get a big black dog up them . I think i will be ordering one from the UK, only downside is i'm off the road till it arrives. Some of these prices are outragious, why is it i can get one from the UK including freight for half the cost of one locally new or reco ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

Loanrangie wrote:
andrew e wrote:i meant $100 including the booster and pedal if you want...

Andrew
Are you able to provide any pics ?
get pics up tonight after work. will be about $20 postage to vic.

Andrew
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Loanrangie wrote:Just got a reply from BMI, nearly fell off my chair - $380+ gst + postage, so they can go get a big black dog up them . I think i will be ordering one from the UK, only downside is i'm off the road till it arrives. Some of these prices are outragious, why is it i can get one from the UK including freight for half the cost of one locally new or reco ?
Because

no GST
No imprt

no storage /handling while waiting for some one to buy.

ect:

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

HSV Rangie wrote:
Loanrangie wrote:Just got a reply from BMI, nearly fell off my chair - $380+ gst + postage, so they can go get a big black dog up them . I think i will be ordering one from the UK, only downside is i'm off the road till it arrives. Some of these prices are outragious, why is it i can get one from the UK including freight for half the cost of one locally new or reco ?
Because

no GST
No imprt

no storage /handling while waiting for some one to buy.

ect:

Michael.
Not even Patricks or P&O charge that much storage at the wharf for a container. They would buy in bulk and wholesale so would get it even cheaoer than i can buy - that just dont cut it.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

Mate,
Not as cheap as from UK but European Auto Imports in Box Hill sell them for $286 + GST and have them in stock, I bought not long ago.

http://www.eai.net.au/
Thanks,

Adam
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

My resleve cost around $220 from BHSS in brisbane, I would consider getting it fixed over buying a new one - at the rate people are charging for the new one you could get it resleved and hire a car while it was off the road and you would still be ahead

Tom
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

RaginRover wrote:My resleve cost around $220 from BHSS in brisbane, I would consider getting it fixed over buying a new one - at the rate people are charging for the new one you could get it resleved and hire a car while it was off the road and you would still be ahead

Tom
For sure ! If andrew e's disco mc and booster will fit then i will buy it if not i will order from the UK, i have another car to drive but i prefer the rangie.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Loanrangie wrote:
HSV Rangie wrote:
Loanrangie wrote:Just got a reply from BMI, nearly fell off my chair - $380+ gst + postage, so they can go get a big black dog up them . I think i will be ordering one from the UK, only downside is i'm off the road till it arrives. Some of these prices are outragious, why is it i can get one from the UK including freight for half the cost of one locally new or reco ?
Because

no GST
No imprt

no storage /handling while waiting for some one to buy.

ect:

Michael.
Not even Patricks or P&O charge that much storage at the wharf for a container. They would buy in bulk and wholesale so would get it even cheaoer than i can buy - that just dont cut it.
I know just trying to make you feel better.
I import my own parts when I can.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Also worth giving FWD Motors a call.

http://www.fwd-motors.com.au/
Phone 61 7 3848 9323
Fax 61 7 3892 2897

They are mainly a wholesaler (supply most of the LR and toyota parts places in OZ), but they also sell direct to the public.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Thanks Ben, filled out a request form so hopefully they wont be too much more than if i order one from Paddocks or the like.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Loanrangie wrote:Thanks Ben, filled out a request form so hopefully they wont be too much more than if i order one from Paddocks or the like.
You would probably get a better price if you phoned them. I found that wholesale price from them was about the same price as buying in the UK or cheaper.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 56
Joined: Wed Jan 21, 2004 9:09 pm
Location: Melbourne

Post by RobG65 »

Talk to the guys at hydraulic & general sleeving 9387 6345 in Hope st Brunswick west. Being and RR they might not have a change over unit.
"All the parts falling off this truck are of the very finest British manufacture"
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

heres pics
You do not have the required permissions to view the files attached to this post.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Well for $70 i getting the m/c re sleeved, none of the UK companies i emailed have replied after nearly 2 days and FWD said $385 !
Andrew thanks for the offer but it is much easier just to re sleeve the original.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 48
Joined: Sat Jan 15, 2005 10:49 am
Location: Melbourne..... Cranbourne

Post by takearidewifme »

are you getting it sleeved at brunswick? cause for that I will get mine done.. I got a s/h one the other day for 50 bucks but Ill get the original sleved and keep the sh for spare..Or see if they will do a better price for 2.....lol worth a go..

Mark
"YOURS MIGHT GO FAST, BUT MINE GOES ANYWHERE"

79 Range work in progress
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I think its better brakes in Mitcham, my old works near by so he got a price - it may be trade.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Recoed m/cylinder just before re fitting, it must be good coz its noice and shoiny :D
You do not have the required permissions to view the files attached to this post.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 32 guests