Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wrangler extractors issue...
Moderator: GUtripper
wrangler extractors issue...
hey fella's.. i am generally a rangie man but my mate was after some info.. he has a 98 model wrangler and he was after a set of extractors for it. he also wanted to know if he could put them in himself. does he have to take the inlet manifold off to get the exhaust off and is it a big job.. cheers guys..
I haven't had to pull mine off but according to the FSM the inlet and exhaust manifolds are removed and installed together as they use a shared gasket. Perhaps you can do just the exhaust if you are careful- one of the other guys will chime in. Though get your mate to check that the new extractors don't reduce the ground clearance. There are some extractors you can get which drop too low or go under the sump. Good ones obviously don't. Hurricane is one brand which I recall people saying did not reduce ground clearance.
Yup you'll have to be a pretty good controtionist to change the exhaust without removing the inlet - sorry dude.
There are a stack of brands - but as MattC Said look for ones that follow the factory lines or some other route that won't reduce clearance - some stuopid ones even go directly under the sump
Hurricane or Banks are IMHO the pick of the crop.
There are a stack of brands - but as MattC Said look for ones that follow the factory lines or some other route that won't reduce clearance - some stuopid ones even go directly under the sump
Hurricane or Banks are IMHO the pick of the crop.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Mate,
I just recently did my extractors on my TJ.
Its a bit of a pig of a job - but it wasnt super hard. You could do it in a weekend if you spent all day on it!
It was quite a simple job - but there are a few tight spots where you cant get your hand into (or out of for that matter) which makes you swear alot! But, other than that... its quite an easy job.
Need any help - let me know!
Cheers
Will
I just recently did my extractors on my TJ.
Its a bit of a pig of a job - but it wasnt super hard. You could do it in a weekend if you spent all day on it!
It was quite a simple job - but there are a few tight spots where you cant get your hand into (or out of for that matter) which makes you swear alot! But, other than that... its quite an easy job.
Need any help - let me know!
Cheers
Will
If he is in Melbourne I have a contact that will do a great job for him.
I used the Hitech brand and they do the job perfectly and are cheap.
Install costs hurt a bit as it is about a 6 hour install for a shop.
As suggested you definitely need to get the ones that go around the sump and not under it.
cheers
z
I used the Hitech brand and they do the job perfectly and are cheap.
Install costs hurt a bit as it is about a 6 hour install for a shop.
As suggested you definitely need to get the ones that go around the sump and not under it.
cheers
z
Yankee,
I bought my extractors from Suburban4wd.com - excellent bunch of people to deal with, and they sold them to me at a reasonable price.
After the extractors, shipping and gasket, i got my extractors for $480. The most expensive part of the install is the install - if that makes sense.
I found they do help a bit - car runs better and what not.
Cheers
Will
I bought my extractors from Suburban4wd.com - excellent bunch of people to deal with, and they sold them to me at a reasonable price.
After the extractors, shipping and gasket, i got my extractors for $480. The most expensive part of the install is the install - if that makes sense.
I found they do help a bit - car runs better and what not.
Cheers
Will
Who is online
Users browsing this forum: No registered users and 1 guest