Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What torque - diff to housing nuts.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

What torque - diff to housing nuts.

Post by 2car »

Ive just popped a new diff in my 40. Ive got the diff-to-housing bolts done up to 40ftlb ie the ones that hold the third member in the axle housing. Is that about right?

TIA

Ben
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Ive never used a torque wrench on those bolts i usually just do them up tight with a ratchet.But i also only use silicon with no gaskit.
Top
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

Sounds about right, proper torque specs for an 80/100 series front diff are something like 25 Nm. Bugger all but they only have spindly M8x1.25 studs though. Have been known to stretch and come loose when locker equipped. :oops:
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Top
Posts: 121
Joined: Mon Oct 21, 2002 9:00 pm
Location: Big Shed

Post by bobtail »

Why stress over someting like that Just tighten it with a shifte :wink: r
Top
Posts: 29
Joined: Sat Nov 02, 2002 10:55 pm
Location: Bray Park

Post by skjtb »

do them up till they snap, then back them off half a turn :lol:
seriously that should be fine.
oh sh#t, not more dents :D
Top
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

RUFF wrote:Ive never used a torque wrench on those bolts i usually just do them up tight with a ratchet.But i also only use silicon with no gaskit.


I hate silicon. :x

Crikey. There are some very funny people around. ROTFLMFAO
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 58 guests