Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

jammed gearbox

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 25
Joined: Fri Mar 03, 2006 10:23 am
Location: sunshine coast

jammed gearbox

Post by spook_95 »

finally got gearbox on my maruti 1l 4 speed welded up put back in car and is now jammed in reverse which is weird as last gear it in was 1st any suggestions pls
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Re: jammed gearbox

Post by christover1 »

spook_95 wrote:finally got gearbox on my maruti 1l 4 speed welded up put back in car and is now jammed in reverse which is weird as last gear it in was 1st any suggestions pls
possibly put gear stick in crooked, that can happen?
It can lock between gears when selectors get bumped when inserting stick.
May be worth a look into.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Take gear stick out and look down selector hole, see whick selector rod is forward or backward(might be two engaged, indicating faulty interlock). If not remove reverse switch and see if reverse selector is jammed in engaged position. Have had hilux box's that were "rebuilt" jamed in reverse. Had to remove reverse switch and manually push reverse fork out of engagement.
Good luck
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 12
Joined: Sun Mar 06, 2005 8:15 pm

Post by micromachine »

When I had my gearbox serviced I had a similar problem, and the mechanic said to lossen the bolt on the left hand side of the gearbox where the gear stick goes a few turns .Because they over tightened it when they put it back together.

I did that and had all five gears back. :cool:

Hope this helps. :)
Posts: 12
Joined: Sun Mar 06, 2005 8:15 pm

Post by micromachine »

When I had my gearbox serviced I had a similar problem, and the mechanic said to lossen the bolt on the left hand side of the gearbox where the gear stick goes a few turns .Because they over tightened it when they put it back together.

I did that and had all five gears back. :cool:

Hope this helps. :)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest