Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Just thinking about getting a rockhopper. If anyone has one in their zook, what is it like? And what difference has i made to their zook Both at speed and offroad, also how much did they pay for it...
that said - if you match up the on road gearing so its close to stock - most replacement gears have a much lower low range... so offroad you'd be way better off in low range... if its too low go to 4th gear or change to hi range...
Calmini 5.14:1 ratio in my zook, on 32's low range is good, and high isnt too bad either. crawl is arond 70:1 in 1st low. As said its all a compromise when you modify a car. Best bet is to work out where you want to take the car, and get gearing to suit, as its at least $1000 for a set of gearing, then install costs. Better to spend once and get it right.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
gday fellas,
thanks for your input. I mainly will be travelling on road, so which one do you suggest I get, plus a bit of off road, primarily for just reaching isolated fishing spots
I have a 1.3 WT zook on 30" tyres.
I will probably only ever go up to 31" max.
I was tossing up between the Calmini 4.16 or the 5.14.
(both are currently on backorder at calmini anyway)
I know lower is better but I dont want to completely stuff up my high range gearing.
And another thing to consider is the the 4.16 gears are $100US cheaper than the 5.14s.
beaver700 wrote:gday fellas,
thanks for your input. I mainly will be travelling on road, so which one do you suggest I get, plus a bit of off road, primarily for just reaching isolated fishing spots
Cheers
are your fishing spots really hard to get too? otherwise i wouldnt be wasting my money personally. i ran 32's with standard gearing for quite a while..wouldnt say id recommend it though. maybe you should be looking towards a 1L case instead if you want a little lower?
TinyGQ wrote:excuse my stupidness but i dont understand how rock crawler gears change its drivig on road? dosnt it only affect it when you put it in 4x4???
nope.. its not like your bigger trucks...
it has a reduction in high range also..
as you would know hi range is hi 2 (normal) or hi 4 (same but in 4wd)
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Ohhh ok that makes sence. Man its like learning a new language! i just got used to how a GQ works and now im keen to get a zook but i have no idea what theyre about! Might buy one already done! lol
I got the 4.1s after having 31 mongrels for a year on and offroad.. it makes it easier on the clutch onroad and offroad my clutch doesnt smell anymore trying to spin the tyres and stuff.
The onroad driving is back to a more standard gearing so the engine works better and offroad the low ratios are much funner to crawl around driving up stuff that i couldn't before.
My 5.14s just turned up today. *WOOHOO* Should have them in this weekend. Running 31" Claws and don't do too much hwy work, so gearing will be good. Gunna go to 32" soon anyway.
Guys from 4X4USA great to deal with. Highly recommend.
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
DAZZ wrote:My 5.14s just turned up today. *WOOHOO* Should have them in this weekend. Running 31" Claws and don't do too much hwy work, so gearing will be good. Gunna go to 32" soon anyway.
Guys from 4X4USA great to deal with. Highly recommend.
$1200 delivered. Seemed a good price compared to other places I enquired at.
Now ya probably gunna tell me I payed too much!!!!!
09 Cruiser Tray ARB Bull Bar/side bars, dual batts, 3" Superiour lift, MTZs, other stuff. More to come!!!
90 Sierra Soft top, 3" body 2" spring lift, 31" Claws, 5.14 Calmini, more to do.
DAZZ wrote:$1200 delivered. Seemed a good price compared to other places I enquired at.
Now ya probably gunna tell me I payed too much!!!!!
Sounds about right... I paid just over $1100 for mine last year from him on my WT/31's. Is a tad lower on road than I would like for a daily driver, But I get good mileage out of it and its awesome off road in low range
DAZZ wrote:$1200 delivered. Seemed a good price compared to other places I enquired at.
Now ya probably gunna tell me I payed too much!!!!!
Na that sounds about right from an Aus dealer
If you buy direct from the US you can get them for around $900-$1000 aus dollars or so.
But I just found out that Calmini wont take Mastercard unless it has a US billing address .
They want payment wired to them (direct money transfer).
How do I do this? Is it as simple as doing a transfer into an Aus account?
Can I just use netbank or is it not that simple?
Paul.
Has anyone heard good or bad things about the Trail tough gear sets?
They do a 4.9 which will probably suit my 30" (or 31" later) tyres nicely.
A bit lower than the series 1 4.16 without being super mega too low for 30s. http://www.trailtough.com/transfercase_driveshaft.htm
Paul.
DAZZ wrote:$1200 delivered. Seemed a good price compared to other places I enquired at.
Now ya probably gunna tell me I payed too much!!!!!
Na that sounds about right from an Aus dealer
If you buy direct from the US you can get them for around $900-$1000 aus dollars or so.
But I just found out that Calmini wont take Mastercard unless it has a US billing address .
They want payment wired to them (direct money transfer).
How do I do this? Is it as simple as doing a transfer into an Aus account?
Can I just use netbank or is it not that simple?
Paul.
ask them how to do it, they will have done this before and will give yu all the details you need