Heathers 1984 1.0L engine is feeling a bit tired. I'm wondering what is the easiest and cheapest engine to drop in as a replacement. The aim is to put in a reliable engine with as little fuss as possible. Trying to work out if it's cheaper to drop in a different donk, or get a rebuilt 1.0L...
Thanks in advance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Replacement engine for 1.0L Sierra
Cheap...Easy....no fuss....
My opinion is if you are not going to go beserk with the mods rebuild the 1lt for here car.
There is a guy in the Suzi club with a 1lt donk, series one rock hopper running 30in tyres without a hassle.
For Ease, Cheapness and lack of fuss rebuild the 1.0lt. You are amazed at how many little things have to be done when you change over an engine. If a 1.3lt is your liking sell the 1.0lt and buy one with the 1.3lt and 5sp as standard. Easy.
My thoughts anyway.
cheers
James
My opinion is if you are not going to go beserk with the mods rebuild the 1lt for here car.
There is a guy in the Suzi club with a 1lt donk, series one rock hopper running 30in tyres without a hassle.
For Ease, Cheapness and lack of fuss rebuild the 1.0lt. You are amazed at how many little things have to be done when you change over an engine. If a 1.3lt is your liking sell the 1.0lt and buy one with the 1.3lt and 5sp as standard. Easy.
My thoughts anyway.
cheers
James
The thing i have found recently with 1 litre engines (around here anyway) is that getting one in good nick is very hard, because they are all stuffed or worn out...i know of a certain wrecker who wanted a grand for one a few months ago...so yeh either go the rebuild or drop a 4K in it if u want to go the cheap replacement option IMHO
CAM
The 3k,4k and 5k Engines are from a Toyota Corolla. The later one had a 5sp box.
I haven't done one of these but have heard that you also need to lift the body in order to get it under the lid. This still doesn't meet with your requirements because it won't be cheap and easy unless you are prepared to do all the work yourself. Also if it is an everyday driver I would still say stick to the 1.0lt get it rebuilt.
James
I haven't done one of these but have heard that you also need to lift the body in order to get it under the lid. This still doesn't meet with your requirements because it won't be cheap and easy unless you are prepared to do all the work yourself. Also if it is an everyday driver I would still say stick to the 1.0lt get it rebuilt.
James
I've seen people mention the 4k option (and seen a few for sale with this engine). Does anyone know what is actually involved with putting this engine in and what vehicle this engine comes out of?
If you have to change motors I'd go with a 660cc one (a la Cappacino - although they come from lots of different sources). However the cost would be more than the potential benefit unless you were doing more to the car.
You could also try 1.0 Swift/Barina as another source for 1 litre motors - I believe you will find there are differences in the manifolds but you should be able to use yours on the Swift engine.
I think the Dizzy is different too, but that's not the bit that's broken on yours is it?
Anyone know for sure?
You could also try 1.0 Swift/Barina as another source for 1 litre motors - I believe you will find there are differences in the manifolds but you should be able to use yours on the Swift engine.
I think the Dizzy is different too, but that's not the bit that's broken on yours is it?
Anyone know for sure?
Suzuki Viagra wrote:If you have to change motors I'd go with a 660cc one (a la Cappacino - although they come from lots of different sources). However the cost would be more than the potential benefit unless you were doing more to the car.
I think that unless you got it out of a cappuccino it would probably be from a FWD car. These engines have a few issues to do with the position of the dizzy etc, that would mean that you would probably have to source the head off a cappuccino (with the dizzy etc in the right place) to make it worth while...
On the other hand, it looks like the block should be the same from one of these cars as the cappuccino one, so if i do blow up the cap motor, i should be able to replace it with one of the cheaper FWD 660cc engines
make sense?
I think all roads are heading back to the mighty 1L again
DMA Founding Member #1 - Now Retired
greg wrote:I think all roads are heading back to the mighty 1L again
And what a might motor they are!!
Im not going to bother doing an engine swap until mine dies..if it aint broke, then dont fix it
(But yours is broke by the sounds murray). Mine goes fine on 31s and with the rockhopper...its crap trying to drive up sand dunes (ask redzook bout that) but it isnt a beach bitch so i dont care 
CAM
[quote="
You could also try 1.0 Swift/Barina as another source for 1 litre motors - I believe you will find there are differences in the manifolds but you should be able to use yours on the Swift engine.
quote]
the 1l in the swift is the 3 cylinder motor, not 4 cyl.
all barinas had the 1.3l 4cyl, not the 3cyl
You could also try 1.0 Swift/Barina as another source for 1 litre motors - I believe you will find there are differences in the manifolds but you should be able to use yours on the Swift engine.
quote]
the 1l in the swift is the 3 cylinder motor, not 4 cyl.
all barinas had the 1.3l 4cyl, not the 3cyl
www.CVEPerformance.com
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
HAVE FITTED 1600 INTO 1LT it does fit if you set up the engine mts correctly without a body lift ,but i fitted a 1300 bonnet. everything fitted just nicely.you should see a 308 auto in a sierra transport dont like it though 
still negotiating 
but hopefully soon 
still negotiating but hopefully soon FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
have most parts available from early to late
call mick 0415156693
Shorty40 wrote:zooker wrote:How much work would it be to fit a 1.6 16v vitara engine in a 1L zook?
You could ask Megaman off this board as he has this engine in a Zook he is selling atm
Supposed to need 2" body lift if you use your existing gearbox and transfer - and why the hell wouldn't you???????
Might be a good idea to get a better clutch than standard though.
Ask love_mud - he's selling his 1.6 Vitara engine soon so he can fit the rotary to his 1.3 Sierra.
CRUSHU wrote:[quote="
You could also try 1.0 Swift/Barina as another source for 1 litre motors - I believe you will find there are differences in the manifolds but you should be able to use yours on the Swift engine.
quote]
the 1l in the swift is the 3 cylinder motor, not 4 cyl.
all barinas had the 1.3l 4cyl, not the 3cyl
Yeah I knew that I was just pissed.
Barina's are a good source for 1.3's.
Who is online
Users browsing this forum: No registered users and 2 guests