Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series window washers

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 17
Joined: Fri Jan 21, 2005 2:42 pm
Location: Sydney

80 series window washers

Post by Penguin »

Hi Guys

I have a 40th anniversary LC and when I turn on the rear window washer, the front one also runs. Not so the other way!

Is there a valve somewhere that controls which washer to supply from the common reservoir?

Mike
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

Mine does exactly the same.
How to fix. :armsup:
Never really botherd me that much.
Burnsy
Posts: 2176
Joined: Sat May 31, 2003 1:30 am
Location: BrisVegas

Post by Mad Cruiser »

my rear doesn't work.... can't be bothered beside never use it anyway
1998 Toyota Landcruiser 100 series GXL
1976 FJ45 Landcruiser ute
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

Yer mine does it to.. i jsut wipe both at once!! :lol:
Posts: 183
Joined: Wed Nov 12, 2003 4:52 pm
Location: Brisbane

Post by Tooheys »

Im pretty sure you will find there is two washer motors. the rear most one in the washer bottle is usually the rear, from memory the line runs down the left guard and into a grommet in the firewall. Id check to see if the rear washer motor is somehow back-feeding power into the front washer motor.
If at first you dont succeed.......get a bigger HAMMER!!!
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

Mad Cruiser wrote:my rear doesn't work.... can't be bothered beside never use it anyway
Mine too so i took the wiper arm off.
www.bolsys.com.au
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Standards and pre 8/92 use 2 motors, later has a valve that rusts up in the passenger side rear corner of the engine bay.....check www.lcool for fix.
Andrew
Posts: 17
Joined: Fri Jan 21, 2005 2:42 pm
Location: Sydney

Post by Penguin »

Standards and pre 8/92 use 2 motors, later has a valve that rusts up in the passenger side rear corner of the engine bay...
Thanks Andrew, that's what I was after.

Mike
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest