Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux centre bearing
Moderators: toaddog, Elmo, DUDELUX
hilux centre bearing
any1 got any tips or hints to putting a new center bearing on ln106.gotta put 1 on on wed
centre
Take it somewhere to get done, they shouldn't charge much labour. Mine was about $20-$30 to fit. Just thought it wasn't worth the hassle of me getting dirty compared to paying that much
My 2c
My 2c
Kind Regards,
Brad
Brad
allrighty just done it myself,
Take off the 4 bolts that hold the rear shaft to the main shaft. Pull these apart, then take the bolt of the end of the shaft it's a 24mm i think, . It'll have a little lip you need to straighten with a screwdriver first. Then take the washer off and pull the old centre bearing off. Put the new one on and tighten. Thats it. Put it all back together the same way you found it and wallah. Oh and don't forget to mark the companiion flanges b4 you pull em apart (The bit the 4 bolts hold together)
Take off the 4 bolts that hold the rear shaft to the main shaft. Pull these apart, then take the bolt of the end of the shaft it's a 24mm i think, . It'll have a little lip you need to straighten with a screwdriver first. Then take the washer off and pull the old centre bearing off. Put the new one on and tighten. Thats it. Put it all back together the same way you found it and wallah. Oh and don't forget to mark the companiion flanges b4 you pull em apart (The bit the 4 bolts hold together)
Let us know how you went with instalation. Just got myself one from ebay for $48.00, was thinking whether or not to do my own as well. Have had a couple of quote's for around $60 to fit it but was told you need a press so that's why I havnt tried it yet, dont want to pull apart to find that out. For $60 I'm just thinking of taking it to mechanic but $60 is $60 I could save. Regards Steve M
Who is online
Users browsing this forum: No registered users and 0 guests