Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removed front driveshaft on 80

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 25
Joined: Tue Jan 18, 2005 11:32 am
Location: Perth, Western Australia

Removed front driveshaft on 80

Post by [WANAPLAY] »

Hey

I pulled my front driveshaft out of my 80 to see if when i put a part time kit in it will fix all my viberation and noise problems after lifting it and it will, but I found it strange that with the front shaft out I have no drive unless i engadge my centre diff lock. It simply sends all the power to the front and none to the rear....

Anyone ever done this also???

Is it normal???

Also is it bad to drive for a while with my front shaft out and my centre diff lock engaged untill i get my part time kit?

Its a 93 GXL with the switch on the dash...


Cheers Ryan
Top
Posts: 2660
Joined: Sun Oct 31, 2004 2:55 pm
Location: Regents Park

Contact:
Contact kroozer91

Post by kroozer91 »

yes if you lift a front wheel on a 80 with out the centre diff lock engaged and try to driv away you cant
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

Its normal for it to do that...

and it wont hurt it to drive it with the centre diff lock on and the front shaft out..
Top
Posts: 82
Joined: Thu Jan 13, 2005 6:45 pm
Location: Brisbane

Post by red80 »

the transfer case is like another open centre diff, it sends drive to the tailshaft with least resistance, when it is locked it sends equal drive to front and rear shafts. You may not notice as much of a difference in economy as you are still turning the front axles and centre, free whell hubs isolate this.
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

red80 wrote:free wheel hubs isolate this.
A part time kit will fix this :D
www.bolsys.com.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests