Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

shackle bushing size and NB pipe size

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 329
Joined: Thu Nov 07, 2002 5:24 pm
Location: Brisbane

shackle bushing size and NB pipe size

Post by derangedrover »

Is there a commonly available shackle type bushing that fits neatly in a NB pipe size? Trying to avoid turning up carriers for the bush when making engine/gearbox mounts.

Cheers
Daryl
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Re: shackle bushing size and NB pipe size

Post by Strange Rover »

derangedrover wrote:Is there a commonly available shackle type bushing that fits neatly in a NB pipe size? Trying to avoid turning up carriers for the bush when making engine/gearbox mounts.

Cheers
Daryl
Aftermarket poly Range Rover rear lower trailing arm to diff bushing fits into 32mm NB Medium wall pipe. We use this all the time for engine and gearbox mounts in the buggies. and control arms on stuff that doesent have heims (mogrover, homeless, budgie, lockless etc)

Sam
Top
Posts: 329
Joined: Thu Nov 07, 2002 5:24 pm
Location: Brisbane

Post by derangedrover »

Thanks Sam.

Does that mean the rangie bush is 35mm OD? The piece of med. wall 32nb that I have measures just under 35mm ID, at least I think its 32nb.

Cheers
Daryl
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 82 guests