Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 Series wheels HELP

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

60 Series wheels HELP

Post by vSAHARAx »

Hey there im looking at buying a set of rims for the cruiser. the wheels im looking at are

Allied Rhino 15"x10"
Offset: -44mm

Will these fit on my 89 Sahara? as i want to put 33"x12.5's on it and want a 10" wide Rim, is this the right offset?. will have it lifted 3" so i dont think height will be an issue.

Will the offset of -44mm be enough so the tyres dont stick out past the factory flares but yet i dont want it scrubbing on the springs.

I want these to fit!!!!!!!!

Cheers in advance!
Troy.
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

haha Any body?
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Posts: 67
Joined: Wed Jun 02, 2004 1:50 pm
Location: Brisbane

Post by Homer »

I tried but difficult to measure when they are on the car
I have 15x8's with 33x12.5's on a HJ61 and they appear to measure approx -44mm offset and they clear the tie rod end on the inside by about 10mm (the weights touched on my FJ73) and the tyre sits flush with the outside of the car at the rear and stick out about 25mm at the front shhhh don't tell anyone
so considering your flares stick out about 50mm it should be OK
but try them on if you can..... to be sure to be sure
Cheers
Scott
Whoops reread it ....15x10's with -44mm could foul the tie rod end for sure if my measuremnt is accurate
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

Cheers for that

as they say they aint big enough til they scrub, so ill see if they will let me try them on the car, i doubt it but its worth a try!

any more oppinions would be much appriciated

Troy.
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

15x8's with a -28 offset with a 12.5" tyre will sit flush with the body even without flares as the below picture shows.

15x10's with a -44 offset will almost certainly stick out past the guards even with the 12.5's.
You do not have the required permissions to view the files attached to this post.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests