Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

96' engine in 87' samurai

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 103
Joined: Tue Aug 17, 2004 5:26 pm
Location: Slovenija (EU)

Contact:
Contact buger

96' engine in 87' samurai

Post by buger »

Will a 96' injected engine fit in a 87' Samurai with carb? :?:

Are there needed some modifications to the engine mounts, will the new engine bolt on the old tranny? :?

What parts of the 96' Samurai will I need to make it run (electronic)? :?

Thanks!
Top
User avatar
Nev
Posts: 621
Joined: Wed May 25, 2005 10:00 am
Location: Brisbane, Australia

Post by Nev »

your 96 mods were injected? thats cool! whats the engine model coz ours were still carby. Could be the engine like in our jimny which is a G13BB before it went twin cam i think....correct if wrong guys.
01 GU Patrol 4.2TD Wagon
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

g13bb isnt twin cam, but is 16v, got one in the shed, putting in today :lol:
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Re: 96' engine in 87' samurai

Post by Gutless »

buger wrote:Will a 96' injected engine fit in a 87' Samurai with carb? :?:

Are there needed some modifications to the engine mounts, will the new engine bolt on the old tranny? :?

What parts of the 96' Samurai will I need to make it run (electronic)? :?

Thanks!
You will need all of the sensors, wiring looms, fuse boxes, ECU and ECU harness, and all ancillaries that are attatche dto the motor ( altenator, starter, etc....and prolly the flywheel and clutch too)

If the EFI motor is still a G13 varient, it will bolt up to your gearbox.
[url]www.twinstickoffroad.com[/url]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest