Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

POST UP YOUR ROVERS

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

Front bar looks awsome, where did you get it from and how much.

Need a second snorkel though :D
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

6.5 rangie wrote:Front bar looks awsome, where did you get it from and how much.

Need a second snorkel though :D
Made by Cheezy racing! They also cut my grill to mount the highmount winch back as far as possible. Its bloody high in the bar too! Pretty happy with there work.
Just wanted to clear my 240 xgt's from the bonnet on the top hoop but they dont fit. :cry: The bonnet wont open with em on!

As for price u betta call Mark! ;)
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Side on!

Image
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Mine a while ago (same time as Micks shot on Ellis)
You do not have the required permissions to view the files attached to this post.
Land Rover Discovery - GQ conversion underway
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

BIg StEvE wrote:
6.5 rangie wrote:Front bar looks awsome, where did you get it from and how much.

Need a second snorkel though :D
Made by Cheezy racing! They also cut my grill to mount the highmount winch back as far as possible. Its bloody high in the bar too! Pretty happy with there work.
Just wanted to clear my 240 xgt's from the bonnet on the top hoop but they dont fit. :cry: The bonnet wont open with em on!

As for price u betta call Mark! ;)
got any front on pics?
TD5 96 Discovery UTE.
Top
Posts: 288
Joined: Sat Mar 18, 2006 4:30 pm
Location: Darwin

Post by jsttry »

Look one page back
mickrangie wrote: got any front on pics?
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

jsttry wrote:Look one page back
mickrangie wrote: got any front on pics?
good fanks missed the last pic :rofl:
TD5 96 Discovery UTE.
Top
Posts: 106
Joined: Thu Mar 31, 2005 8:07 am
Location: melbourne, victoria, Australia

Post by Chris F20 maniac »

sweet pics and awesome bar stevo, my rig should be up here soon i hope!
:D :armsup: :armsup: :armsup:
81' 2 door rangie 4.4l V8
ROCK 'N' ROLL AINT NOISE POLLUTION!
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

new tyres/bar/bash plate/turbo

Post by def90 »

finally got my new overpriced but nice scorpion winch bar on, along with new alloy bash plate, turbo and creepy's :twisted:

couple of poser shots...going playing this weekend to test her out

cage needs repaint though... :?
You do not have the required permissions to view the files attached to this post.
Top
Posts: 884
Joined: Mon Sep 01, 2003 8:59 pm
Location: melbourne

Post by defender kev »

Looks awesome def90 i love those bars but aint no way i'm paying for one :D (might try and build one)
Let us know how this weekend goes.
"Why do the British drink their beer at room temperature? Because Lucas builds their refrigerators."
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Re: new tyres/bar/bash plate/turbo

Post by "CANADA" »

def90 wrote:finally got my new overpriced but nice scorpion winch bar on, along with new alloy bash plate, turbo and creepy's :twisted:

couple of poser shots...going playing this weekend to test her out

cage needs repaint though... :?

there is a 4BD1 hiding in it, isnt there?

pix!!!
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

a few more pics of mine

modded front bar, duel snorkels on and running :D











just :roll:


anyone want to swap tyres, want something a little less aggressive
You do not have the required permissions to view the files attached to this post.
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

4bd1

Post by def90 »

couple of pics with turbo, gotta find skinny scoop to put over intercooler yet, or fab one up. going to put a little 8" fan under it to pull air down when air flow is minimal (off road)

still to get fuel pump adjusted properly, i've just given the little adjuster screw 4 or so turns. awaiting gauges to set up properly.

has a little more poke with 11Psi pushing inot her :twisted:
You do not have the required permissions to view the files attached to this post.
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

turbo

Post by def90 »

yes turbo is on backwards. :lol:

to fit behind alternator this was the only way, it is a RB20 (skyline) turbo off an import, water and oil cooled, spools up nice and early. i'cooler of a RB20 too, small but better then nothing.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Did you do it yourself? What's it cost all up?

Looks sweet :armsup: :D
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

turbo

Post by def90 »

nah maggot, got a mate that imports jap cars and builds drift cars, etc. got him to do it for foldings for me, haven't got the bill yet :lol: , he said it wouldn'tbe too much though. turbo was round $200 then just 2nd hand i'cooler and plumbing, hoping not too much over $1100, but wait n c....

bit tcheaper then doing it with a 'new turbo', mates new garret for his was over $1500 alone!!
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Re: turbo

Post by Maggot4x4 »

def90 wrote:nah maggot, got a mate that imports jap cars and builds drift cars, etc. got him to do it for foldings for me, haven't got the bill yet :lol: , he said it wouldn'tbe too much though. turbo was round $200 then just 2nd hand i'cooler and plumbing, hoping not too much over $1100, but wait n c....

bit tcheaper then doing it with a 'new turbo', mates new garret for his was over $1500 alone!!
Do you think he could do more than 1? :D ;)
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Re: turbo

Post by "CANADA" »

Maggot4x4 wrote:
def90 wrote:nah maggot, got a mate that imports jap cars and builds drift cars, etc. got him to do it for foldings for me, haven't got the bill yet :lol: , he said it wouldn'tbe too much though. turbo was round $200 then just 2nd hand i'cooler and plumbing, hoping not too much over $1100, but wait n c....

bit tcheaper then doing it with a 'new turbo', mates new garret for his was over $1500 alone!!
Do you think he could do more than 2? :D ;)

:twisted:
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

turbo

Post by def90 »

mate i'll talk to him today,

going down to put boost gauge and oil pressure gauges on...and get da bill, i'll talk to him while i'm down there.

Fawk pyro's are bloody expensive!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Re: turbo

Post by Maggot4x4 »

def90 wrote:mate i'll talk to him today,

going down to put boost gauge and oil pressure gauges on...and get da bill, i'll talk to him while i'm down there.

Fawk pyro's are bloody expensive!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Any Luck?
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

turbo

Post by def90 »

hey maggot, mate can't say what my bill was sorry :lol: , but he said 'others' would be $1600-$2000 depending on gauges and setup.

by the way i got no heater so thats where my i'cooler is. its a private import and 'didn't come with one'
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Pic of my Gayrover, its used as my hack/tourer until i finish my tray, its a 6.2chev diesel, LT77, rear airlocker and 33"radial claws
You do not have the required permissions to view the files attached to this post.
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 106
Joined: Thu Mar 31, 2005 8:07 am
Location: melbourne, victoria, Australia

Post by Chris F20 maniac »

hey guys!

looks like a nice paint Job there!


THE BEAST HAS ARRIVED :armsup: :armsup: :armsup:

ill get some pics up soon/

its an 82' 2 door with a 4.4l V8, 40mm lifted springs and 33in BFG muds.

next to do on the list shortly after roady and reg is a 2 1/2 inch body lift, then some big rubber!
81' 2 door rangie 4.4l V8
ROCK 'N' ROLL AINT NOISE POLLUTION!
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

just a couple of quick ones...

she's not sprayed yet (letting the engineer have a gander first) and she's gunna be a lil higher and locked next time the funds allow!

it was an 83 4 door, now a nice neat extra cab :armsup:

disco interior, 4.7ish leyland stroker, ZF auto and a few other bits.

Simon
You do not have the required permissions to view the files attached to this post.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

shakes wrote:just a couple of quick ones...

she's not sprayed yet (letting the engineer have a gander first) and she's gunna be a lil higher and locked next time the funds allow!

it was an 83 4 door, now a nice neat extra cab :armsup:

disco interior, 4.7ish leyland stroker, ZF auto and a few other bits.

Simon
Looks sweet, I really like that :D :armsup:
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

couple more...

engineer is coming next wed, will be interesting!

got the lockheed 4 pots all round so no drama's with stopping the mighty old leyland
the back of the cab has 50x50rhs all the way around (look closely at the 'C-pillar'), solid as a rock!

currently sitting on 2" koni's.

Simon
You do not have the required permissions to view the files attached to this post.
Top
Posts: 211
Joined: Wed Dec 18, 2002 8:17 pm
Location: Moura

Post by Carl Coight »

This is my baby it is still not finished but is getting there.
*It was a 78 2 door
*supercharged 253
*4 spd
*GQ front and rear diffs
*35x12.5 for on road and 37 off road
*roll cage in next week or 2
*winch this week end.
this is an older pic so i'll get some more recent ones this break.
You do not have the required permissions to view the files attached to this post.
Live fast, die young and have a bloody good looking corpse.
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

nice one carl looking good man!
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Some pics from the weekend :D
You do not have the required permissions to view the files attached to this post.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 37
Joined: Wed Feb 25, 2004 1:33 am
Location: Victoria

Contact:
Contact def-90

Post by def-90 »

LAtest pics of my 90.....lift to come soon....

BTW def90, your truck looks awesome.

Image

This one with Daughter Ashley....
Image

Image
2008 Disco 3 TDV6
2003 Defender 90
1988 Rangie Hiline
1985 Rangie 4.2
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests