Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RR stuck in first!!

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 10
Joined: Mon Jan 09, 2006 10:53 am
Location: Brisbane

RR stuck in first!!

Post by Mango »

Hi all. Just bought my first RR and may be having dramas already.

It's an 86 rr efi vogue and although I test drove it the other day and it was driven to my place working fine, the gearbox (24hours later) seems to be stuck in first gear. It's an auto box (I'm assuming it's a ZF 4speed although my old man isn't convinced because there is only 3 selectable forward gears plus drive on the selector) and the previous owner said he has never had a problem like this before. I'm inclined to believe him for various reasons.

I tried cycling through the gears as well as just using drive but I only get first gear. Even tried taking the revs up close to redline and backing off. BTW - it's my first auto so I'm not real clued up about them yet. Does making sure it's very warm before moving offf make a difference? I'll check the oil levels this afternoon.

Any thoughts on what might be the cause would be appreciated

Cheers

Mango
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

You'll find it is more than likely a sticking governer. This will make it stay in first gear no matter what the RPM or road speed.

JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

justinC wrote:You'll find it is more than likely a sticking governer. This will make it stay in first gear no matter what the RPM or road speed.

JC
does it take off in first from drive??? or do you have to select 1/L on the shifter???

Mine wouldnt take off from drive i had to select first and then after moving along if enough speed was up i could jump to second or sumtimes drive but as soon as it went under load it jumped into nuetral, turns out mine was completely stuffed...

If it still takes off from drive and is just acting as per normal but not getting out of 1st then its most likely is just as has already been said just a sticky governor.

If its going into nuetral (no drive at all) under load or in any selected gear then your probs may be worse (like mine :( )

cheers
Anthony

p.s. yes it is a ZF4 Auto (4 Speed) with lock up convertor (kicks in around 80ks when cruising). Its should be mated to a LT230 transfer case.
Posts: 10
Joined: Mon Jan 09, 2006 10:53 am
Location: Brisbane

Post by Mango »

Yeah, it takes off in drive (and 1st, 2nd, and 3rd gears on the selector) but stays in first. Sounds like it might be the governor then. Is that a replacement part or does it just take a strip down and clean or a couple taps with a hammer.. I'll look into it anyway....cheers for the answers

Mango
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

I reckon you are up for a reconditioned Auto.
Have you changed the transmission oil?

Put yourself out of your missery and get it checked out me thinks, or into your missery.

There is a place down the Gold Coast that isn't too expensive. Are you on the south side or north side?
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 10
Joined: Mon Jan 09, 2006 10:53 am
Location: Brisbane

Post by Mango »

Reco gearbox!!!!

Don't tell me that, I thought my truck was a bargain at $1500- ;)

Actually it turned out to be a downshift (?) cable that apparently pops out of place and gets stuck when you give it a bootful. The old owner got back in touch with me because he remembered the fault. He hadn't had the problem for a while because he didn't often plant it..........mentioned something about the price of fuel.........................

Cheers

Mango
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Sweet
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests