Hi all,
Just scored a 9500lb winch ,
i pretty sure i have a tjm bar,
whats the go with mountng it?
the 4 bolts from the winch , are they top front or ?? some other way?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fitting a low mount winch to tjm bar-hilux
Moderators: toaddog, Elmo, DUDELUX
fitting a low mount winch to tjm bar-hilux
GQ//6" lift//2" Body//37" M/T//fnt+rear arb lockers//arb bar work// Gme3200// + Car seats x 3
its got the slot in the front for the fairlead,and hole on the top for the clutch lever,
also underneath the bar, in the side supports has cut aways to allow the motor and g/box to slid in?
it looks like a TJM bar, but not 100% sure,
any help would be great.
Cheers
also underneath the bar, in the side supports has cut aways to allow the motor and g/box to slid in?
it looks like a TJM bar, but not 100% sure,
any help would be great.
Cheers
GQ//6" lift//2" Body//37" M/T//fnt+rear arb lockers//arb bar work// Gme3200// + Car seats x 3
Who is online
Users browsing this forum: No registered users and 0 guests