Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 Series Travel

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 45
Joined: Thu Oct 21, 2004 6:32 pm
Location: Fortitude Valley (Brisbane)

100 Series Travel

Post by Fatty »

I have a 100 Series Standard Diesel (Solid Front Axil) and my friend has an 80 series Wagon. We both want more front travel. He has a 2 Inch coil lift happening and so I need to catch up.

To give me a coil lift I've found this:

Toyota Landcruiser 50mm lift coils plus shockers,
suit 80 Series wagon, $355

And have two questions:

1) Does anyone know if the above 80 series coil lift would fit my 100?

2) What can be done to give more front end travel, I've heard the Haultech GQ radius arm bushes might be the go as they are the same as 80/100 series.


Cheers,
Fat
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Re: 100 Series Travel

Post by JOHNZ »

Fatty wrote:I have a 100 Series Standard Diesel (Solid Front Axil) and my friend has an 80 series Wagon. We both want more front travel. He has a 2 Inch coil lift happening and so I need to catch up.

To give me a coil lift I've found this:

Toyota Landcruiser 50mm lift coils plus shockers,
suit 80 Series wagon, $355

And have two questions:

1) Does anyone know if the above 80 series coil lift would fit my 100?

2) What can be done to give more front end travel, I've heard the Haultech GQ radius arm bushes might be the go as they are the same as 80/100 series.


Cheers,
Fat
80 & 100 run the same suspension. if you want travel make sure the shocks are long enough. front sway bar will restrict travel.
sorry don't know about haultech bushes.
Is that $355 for front coils & shocks [must be s/hand] ?
cheers Johnz
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Posts: 45
Joined: Thu Oct 21, 2004 6:32 pm
Location: Fortitude Valley (Brisbane)

Post by Fatty »

Heard from Tewantin mob that the 80 series coils will not fit a 100 series, which contradicts Johnz post.

They also said that 100 Series have different rating coils based on the engine type. $350 was second hand as the owner upgraded to higher coil lift.

Ruff can hook me up with a set of 4 bushes but is not 100% if they fit a 100 series.

I have the option to check out the same vehicle with a 3" lift, but am not sure if it is coil or chassis (assume chassis). It'll cost me about $750 to do this.

Fat.
Posts: 79
Joined: Sun Aug 08, 2004 5:36 am
Location: Heathcote,Sydney

80s coils in 100s

Post by Grasshopper »

I sold my 80s 1yr ago and took the springs and shocks out and bolted it all into my 100sRFS.Whoever told you they dont fit maybe ment they have different spring rates.
Dave
1998 HZJ105
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

I bought a 4" lift and on the box it definately was for both the 80 and 100 series. They said there was no difference. Obviously as long as the 100 is solid axle.
Twin Turbo V8 80 Series Ute with Extra Bits
Posts: 45
Joined: Thu Oct 21, 2004 6:32 pm
Location: Fortitude Valley (Brisbane)

Post by Fatty »

I'd say the guy who said you can't fit 80 series gear into a 100 must have thought that I had IFS not solid axil.

So I'm researching Dobinson shocks (www.dobinsonsprings.com) and Lovells coils for 3". I figure I rather pay a little more for new shocks and 3" lift (better than 2").
Posts: 204
Joined: Wed May 25, 2005 6:18 pm
Location: Karratha Western Australia

Post by shanegtr »

I've got lovells in my 80, the ride is now heaps better than stock
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

80 coils

Post by jimbo jones »

Fatty wrote:I'd say the guy who said you can't fit 80 series gear into a 100 must have thought that I had IFS not solid axil.

So I'm researching Dobinson shocks (www.dobinsonsprings.com) and Lovells coils for 3". I figure I rather pay a little more for new shocks and 3" lift (better than 2").
Ive got a set of dobson coils 4" with tough dog big bore adjustable shocks & they work really well on & off road
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests