Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

70 series LSD

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 56
Joined: Sun Feb 20, 2005 4:07 am
Location: South East Kent ( UK )

Contact:
Contact Ravenous Rhino

70 series LSD

Post by Ravenous Rhino »

i have a 70 series and want to put a limited slip diff into the rear, any help on what other toyota diff i can hunt down to fit it or is the only way to buy an aftermarket centre boss?
You do not have the required permissions to view the files attached to this post.
1993 Landcruiser 70 2.5 TD
35x14.50x15 boggers on 10x15 Chrome Rims
+3" over coils, Procomp shocks
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

As your in UK, I don't think any LC's were kitted with factory LSD. Anyway, you can try source a factory LSD from an 80 series...including axle.

Alternatively, go for a new or recon ARB air locker, far better than LSD anyway!!
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

hi,

your sig line says
1993 Landcruiser 70 2.5 TD
but there is no 2.5 litre turbodiesel 70 series unless you have fitted another engine - it is either a 2.4 litre 2L-T(E or II) or a 3 litre 1KZ-T(E).

gotoy is right - if the vehicle does not have a factory LSD (I would be surprised if it didn't already though!), your best option is a locker of some description.

gotoy is wrong - the LSD out od an 80 series will not fit - the light duty 7x series "landcruisers" have an 8" rear differential like a hilux - a hilux LSD will in fact fit although there may be some playing around with carrier bearing sizes.
Free air locker to the first 20 callers!
Top
Posts: 56
Joined: Sun Feb 20, 2005 4:07 am
Location: South East Kent ( UK )

Contact:
Contact Ravenous Rhino

Post by Ravenous Rhino »

its a 2447cc in the uk its badged as a 2.5. are the 80 series diffs the same ratio?
1993 Landcruiser 70 2.5 TD
35x14.50x15 boggers on 10x15 Chrome Rims
+3" over coils, Procomp shocks
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

Ravenous Rhino wrote:its a 2447cc in the uk its badged as a 2.5. are the 80 series diffs the same ratio?
it would be illegal to badge a 2447 as 2.5 litre here.

80 series diffs are all 4.1:1 ratio, yours are probably 4.556:1 or 4.875:1 - you can check the ratio by reading the 'axle' code off the build plate on the firewall.
Free air locker to the first 20 callers!
Top
Posts: 56
Joined: Sun Feb 20, 2005 4:07 am
Location: South East Kent ( UK )

Contact:
Contact Ravenous Rhino

Post by Ravenous Rhino »

ok will have a look thanks for the help
1993 Landcruiser 70 2.5 TD
35x14.50x15 boggers on 10x15 Chrome Rims
+3" over coils, Procomp shocks
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

correct me if i am wrong but isnt that a 90's bundera hence hilux centres?
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

badger wrote:correct me if i am wrong but isnt that a 90's bundera hence hilux centres?
Yeah, same axles as hilux, the offset types.

Better this guy goes for the ARB locker, I heard the LSD is not so good.
Top
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

Post by Bundy_Harry »

Does anyone on know if that series of Bundera was released here in OZ?
If yes does anyone know where I can get some parts from one of them, especially dash components, front guards, radiator support, apron and bonnet?

Bundy_harry
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests