Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Low Range "Rock Crawler" gears

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

SimplyPV wrote:not much room. not sure if anyone has tried. :?
whats the wheelbase of a feroza?

people are fitting a similar combos in zuks, 1.6 vitara gbox and tcase then 1.3 sierra tcase

as vit case is 1:1 in high and centered rear output

only thing is then ur drive shaft output wont match up with ur centered rear diff
but thats no big deal
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 2431
Joined: Thu Sep 04, 2003 12:02 pm
Location: Stayton, Oregon, USA

Post by SimplyPV »

thats part of the problem, drivelines wouldnt match up....

another problem is that the feroza box tends to be a tad longer than the zooks.
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Top
Posts: 236
Joined: Tue Aug 09, 2005 8:24 pm
Location: Brisbane

Post by Rb25sil80 »

Is it fully engineered??
not yet... extended shackles and welded rear :finger:
all under QLD transports watchful eyes :roll:
How exactly do you get a welded diff engineered? I was under the assumption that this was highly illegal and extremely frowned upon. Seen numerous bogans in old holdens/fords getting booked and towed in various hot spots around Brisbane for having welded rears. God knows why you'd want one anyway :D

If you've got MQ diffs why dont you just cough up for some decent lockers instead of being a tightward! Hell if they were available for the F310 I wouldnt hesitate, certainly not going to have a BIC locker in the back, one way trip to hell !

Cheers
Brad
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

Rb25sil80 wrote:
Is it fully engineered??
not yet... extended shackles and welded rear :finger:
all under QLD transports watchful eyes :roll:
How exactly do you get a welded diff engineered? I was under the assumption that this was highly illegal and extremely frowned upon. Seen numerous bogans in old holdens/fords getting booked and towed in various hot spots around Brisbane for having welded rears. God knows why you'd want one anyway :D

If you've got MQ diffs why dont you just cough up for some decent lockers instead of being a tightward! Hell if they were available for the F310 I wouldnt hesitate, certainly not going to have a BIC locker in the back, one way trip to hell !

Cheers
Brad
point 1: this isnt about my car, it was about gearing
point 2: i said its not fully engineered? WTF!!
point 3: i did the swap myself for half the price of a locker :finger:
point 4: i was going to call you an asshat, but its the net and people cant tell sarcasim/ critisim etc apart

...
MULL
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

SimplyPV wrote:thats part of the problem, drivelines wouldnt match up....

another problem is that the feroza box tends to be a tad longer than the zooks.
drivelines arnt an issue

all zuks with zuk transfers and hilux diffs wich is quite alot have a compound driveshaft angle

whats the wheelbase on a feroza? zuks are 79.9" stock surley a feroza is longer then that
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

redzook wrote:
SimplyPV wrote:thats part of the problem, drivelines wouldnt match up....

another problem is that the feroza box tends to be a tad longer than the zooks.
drivelines arnt an issue

all zuks with zuk transfers and hilux diffs wich is quite alot have a compound driveshaft angle

whats the wheelbase on a feroza? zuks are 79.9" stock surley a feroza is longer then that
my rocky had 100" but its a LWB
maybe 80-90" for a SWB/fez
MULL
Top
Posts: 236
Joined: Tue Aug 09, 2005 8:24 pm
Location: Brisbane

Post by Rb25sil80 »

Spartacus wrote:
Rb25sil80 wrote:
Is it fully engineered??
not yet... extended shackles and welded rear :finger:
all under QLD transports watchful eyes :roll:
How exactly do you get a welded diff engineered? I was under the assumption that this was highly illegal and extremely frowned upon. Seen numerous bogans in old holdens/fords getting booked and towed in various hot spots around Brisbane for having welded rears. God knows why you'd want one anyway :D

If you've got MQ diffs why dont you just cough up for some decent lockers instead of being a tightward! Hell if they were available for the F310 I wouldnt hesitate, certainly not going to have a BIC locker in the back, one way trip to hell !

Cheers
Brad
point 1: this isnt about my car, it was about gearing
point 2: i said its not fully engineered? WTF!!
point 3: i did the swap myself for half the price of a locker :finger:
point 4: i was going to call you an asshat, but its the net and people cant tell sarcasim/ critisim etc apart

...
Cheers for not getting tooo upset. Just what you wrote initially implied that at some stage it would be a fully engineered, DOT aproved vehicle. And my question was how would you have it engineered as welded diffs are totally illegal as far as i know.... Not having a dig just not really understanding what you said. Feel free to call me whatever you like and raise your finger all you like ! As you said, its the net, who gives a toss :D
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

Rb25sil80 wrote:As you said, its the net, who gives a toss :D
bingo ;)


so any way i had posted up somwhere all the ratios, n some other info
somewhere in daihatsu... ill have a look now
MULL
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=41630

last posts rocky related
MULL
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 3 guests