Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mq flex

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 196
Joined: Sun Mar 26, 2006 5:31 pm
Location: Redcliffe, Brisvegas

Contact:
Contact zer0

mq flex

Post by zer0 »

have heard a few people ask different ways of gettin flex from a mq and whilst this has probably been discussed before the best way / only way i can really see is with softer springs and shackles

for example my mq was 2in spring lifted however on closer inspection with a mate we found out i only get about 1-2 inch of flex.... so wat to do

REMOVE LOAD LEAVES

and this is wat we got from her cruiser canyon

Heath
You do not have the required permissions to view the files attached to this post.
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

we touched on it here and took it a bit futher then the initial question if you want that little extra
:D
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=66839
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

i was going to link over to this very thread ;)
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 196
Joined: Sun Mar 26, 2006 5:31 pm
Location: Redcliffe, Brisvegas

Contact:
Contact zer0

Post by zer0 »

thanks guys having a read of it now
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests