Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body Lift 1990 Vitara

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 99
Joined: Mon Jan 17, 2005 2:55 pm
Location: Victoria

Body Lift 1990 Vitara

Post by LTDHO »

I have the above vehicle in SWB.
Now from what I have read so far I can go a max of 1 inch on the studs without getting special nuts made. I need 8 spacers.

Now, is the 1" ontop of the rubber mount or including?
Is 8 all I need?
The front two are bolts, will I need longer ones.
All studs are 8mm and the bolts are 10mm.
Can I use alumimum or steel block (not tube) or do I need a softer material?
Please letme know if I'm on the right track. I want to lift body ASAP.

Thanks,
Wayne
LTDHO is my Ford 361rwkw (not for off road)
Suzi Vitara is my new hobby. 30's only and now 30mm higher, awaiting TURBO :D
Top
Posts: 86
Joined: Wed Feb 08, 2006 10:15 am

Post by Dee 4x4 »

I'm also interested to know these things as I'm thinking of helping a mate out with a 1" body lift on his 1996 2.0l and doing the work ourselves.
S1 R33 Gts-t: ITS T04e, Wolf3dv4, 16psi - 242rwkw - DEAD (mate flipped it)

Sierra: 4AGE 20v, ARB rear locker, 30's
Top
Posts: 99
Joined: Mon Jan 17, 2005 2:55 pm
Location: Victoria

Post by LTDHO »

Can this be confirmed? I want to do it right?
LTDHO is my Ford 361rwkw (not for off road)
Suzi Vitara is my new hobby. 30's only and now 30mm higher, awaiting TURBO :D
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest