Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

USA chap seeks toy advice

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 17
Joined: Mon Nov 08, 2004 2:19 pm
Location: air capital

USA chap seeks toy advice

Post by pendy »

Hey all!

I am a Land Rover geek but recently bought a toyota truck to run parts at my shop. I had some questions, hoped you all would see fit to share some information about. Thanks in advance.

I bought a 81' Toyota mini truck with 2.2l diesel and five speed transmission. It has low compression in number 4 cylinder. Needs repaired or replaced. You all prolly know diesel toys are hard to come by over here. So here is my question.

A guy up in Canada has a 2LT for sale with a bad cylinder head. And no turbo on it. Can I reuse my cylinder head? Can I reuse my injectiton pump? It seems to have the boost compesator in the tophat of the injection pump. If I get the turbo exhaust manifold also can I use a T4 garret turbocharger straight bolt on or will an adaption be necessary?

Any other thoughts or comments appreciated. I have been searching around about this but would like some more educated response.


Cheers
JP
legend in my own mind
Posts: 27
Joined: Tue Mar 28, 2006 7:29 am
Location: Blenheim, NZ

Post by muddy12 »

I can't help you directly, but....

there are some real Hilux gurus on the toyota forum at http://www.offroadexpress.co.nz/

I'm sure you'd get some more good advice if you posted there as well
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Why noy just repair your engine? You have an L engine, but I think a 2l-t head will fit,

Yes you can use all your parts, but bare in mind the fuelling on the pump is set to a smaller engine. Some adjustment will be necessary. Garret turbos wont bolt up straight, toyota use unique flanges for the turbos, if you can find a ct20 it will fit up.

Hope this helps

Andy
Posts: 17
Joined: Mon Nov 08, 2004 2:19 pm
Location: air capital

Post by pendy »

Thanks Andy,

Of course the fueling would have to be adjusted to suit. Glad to hear the other parts will interchange. I hear the pistons in the 1l are not suited to turbocharging so that is why I located a 2lt donor. Bad news on the turbo. Anyone make a straight forward adapter for a garret?

Thanks again
JP
legend in my own mind
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests