I'm putting a td Bundera gearbox into my hilux and have the option of using the bundera extension housing and transfer (means crossmember mount is 110mm forward than stock hilux)
OR
finding an extension housing from 100 or 79 series diesel box and using the matching transfer case. Would the extension housing on these babies be longer than the bundera? I'm trying to minimise shortening the front driveshaft with this idea if possible.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
R151 extension housings
Moderators: toaddog, Elmo, DUDELUX
I have been making this adaptor for about 5 years now
I have been grafting the Hilux to Bundera housings together so you keep the geardrive transfer case
This all fits back in like the original Hilux configeration it sits on the cross member without being modified tail shaft stays the same and gear levers come through the original hole in the floor
I also have a 21/23 spline coupler to marry these tother
If you dont have a body lift you will need to space the crassmember down 2cm
Adrian
I have been grafting the Hilux to Bundera housings together so you keep the geardrive transfer case
This all fits back in like the original Hilux configeration it sits on the cross member without being modified tail shaft stays the same and gear levers come through the original hole in the floor
I also have a 21/23 spline coupler to marry these tother
If you dont have a body lift you will need to space the crassmember down 2cm
Adrian
1KX also?toyrex wrote:I have been making this adaptor for about 5 years now
I have been grafting the Hilux to Bundera housings together so you keep the geardrive transfer case
This all fits back in like the original Hilux configeration it sits on the cross member without being modified tail shaft stays the same and gear levers come through the original hole in the floor
I also have a 21/23 spline coupler to marry these tother
If you dont have a body lift you will need to space the crassmember down 2cm
Adrian
I understand this to mean you graft extension housing from behind g52 gearbox to Bundera extension housing so that it is possible to mate a R15# gearbox to Hilux gear transfer?toyrex wrote:I have been making this adaptor for about 5 years now
I have been grafting the Hilux to Bundera housings together so you keep the geardrive transfer case
Adrian
I want to keep the Bundera transfer case as my truck has 80 series diffs and the rear shaft will line up better. So if you can extend the Bundera extension housing I would be interested.
Josh.
Who is online
Users browsing this forum: No registered users and 1 guest