Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bolt tension settings...

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 8
Joined: Mon Jan 30, 2006 7:50 pm
Location: NSW Central Coast

Contact:
Contact MON58L

Bolt tension settings...

Post by MON58L »

Can anyone tell me the torque setting for the flywheel to crankshaft bolts and pressure plate bolts on a 2H power HJ47.

Thanks in advance for your assistance.
Simon
[img]http://users.tpg.com.au/mon69/avatar001a.gif[/img]HJ47, twin tanks, rear locker, bars & racks...
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

from the max ellery book you have 87ft or 118 nm
Top
Posts: 8
Joined: Mon Jan 30, 2006 7:50 pm
Location: NSW Central Coast

Contact:
Contact MON58L

Post by MON58L »

Plowy,

Thanks for that. I take it that is the flywheel bolts. Any chance of checking the pressure plate bolts for me too please.
Simon
[img]http://users.tpg.com.au/mon69/avatar001a.gif[/img]HJ47, twin tanks, rear locker, bars & racks...
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

the torque setting for the pressure plate is 14ft or 19nm

do the pressure plate up evenly not dead tight one side and then the other as it can cause damage

ive never tensioned the pressure plate bolts i just made sure they were pretty dam tight

have gorne crazy n snape tho :oops:
Top
Posts: 8
Joined: Mon Jan 30, 2006 7:50 pm
Location: NSW Central Coast

Contact:
Contact MON58L

Post by MON58L »

Thanks mate. I was told 25, which I did them up to earlier today so I guess they will be ok...

I see your on the Central Coast, as am I. Where about are you?
Simon
[img]http://users.tpg.com.au/mon69/avatar001a.gif[/img]HJ47, twin tanks, rear locker, bars & racks...
Top
Posts: 8
Joined: Mon Jan 30, 2006 7:50 pm
Location: NSW Central Coast

Contact:
Contact MON58L

Post by MON58L »

Plowy,

Thanks for your help, it's all fixed now and even made it to Rover Park and back this week.
Simon
[img]http://users.tpg.com.au/mon69/avatar001a.gif[/img]HJ47, twin tanks, rear locker, bars & racks...
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

woo hoo :armsup:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 39 guests