Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ser 11 Disco Traction Control

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 72
Joined: Sat Dec 25, 2004 2:12 pm
Location: Newcastle.au

Ser 11 Disco Traction Control

Post by Casey_leonard »

Hi All
How can I (if possible) disable the Auto Traction Control on my Ser 11 Disco 4.0.
Sorry if it has been discussed before but my search returns zero.

Casey
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

If u have a cdl engage it then turn the car off and back on again that will disable the traction control and abs......if not pull the fuse :lol:
TD5 96 Discovery UTE.
Top
Posts: 72
Joined: Sat Dec 25, 2004 2:12 pm
Location: Newcastle.au

Post by Casey_leonard »

Hi
I don't have CDL and cannot see a fuse with TC listed.
Maybe I am looking for the wrong symbol or the wrong place.
Attached is pic's of my fuse box from under the bonnet, is there any other fuse's that I should be looking for.
You do not have the required permissions to view the files attached to this post.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

i am not sure which fuse it is but u should look in yr manual... i think there are some fuses under the dash as well....

Mick
TD5 96 Discovery UTE.
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

A good start would be the one marked (ABS). Top row about 1/3 from left I think.
Regards Philip A
Top
Posts: 139
Joined: Mon Dec 05, 2005 6:06 pm
Location: Eastern Melbourne

Post by awright »

You should really install a centre diff lock as traction control takes time to kick in during which time on a steep slippery hill you will kick off to the left severely.

You can buy kits for them and they are simple to put in because when they stopped installing they didnt change the centre diff setup. This means it is basically a cable connection and that's it.
Take me to the Bush!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests