Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Little help on a little car; BJ70

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1
Joined: Mon Apr 17, 2006 6:05 pm
Location: Goolma NSW

Little help on a little car; BJ70

Post by farmerdan »

Hey everyone, I was hoping to get a little guidance with purchasing a new BJ70. [http://www.autotrader.com.au/DealerProd ... ctID=12426] This is the car. It should be the one on top of the list, the fat lipped BJ70.

It is an import and I am wondering if this makes a difference? I have had a BJ70 before, a 1987 model. This one is a 1990 and I was wondering if this changes the engine at all? E.g i had just changed the injectors in the my old one, are they transferable?

I was thinking of putting a AXT turbo on it just for a little extra kick but then read a lot about the Bj73-74 with its direct injection and wondered if it is worth looking around for one instead.

Thanks for any help you can offer

Dan
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

definately the older model, id be looking for a later pj70 with the 5 cylinder 3.5 diesel....or the hj70 with the 1hz.
There could be anything in there fropm the 3b to the 13bt....it is also probably 24 volt.
Andrew
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest