how to tell if 80 Series MC is from an ABS model or not?

[whiteknight]

As it says, I bought an 80Series MC and booster to upgrade my hilux brakes and have just realised that it needs to be the non ABS one. Doesnt it?

[simkell]

it shouldn't matter as the abs is controlled after the master cyl. did u buy a new m/c or a second handone. beware a second handone if been left to sit a while might be gummed up with sludge and crap in the inside and the rubbers might be perished. also bleed the m/c before installing as this will help with bleding the brakes later.

[dow50r]

The ABS one has a port coming out on top of the end aswell as the side...you most probably dont have that one....good upgrade though...
Andrew

[4sum4]

so can you use an ABS one if you block the unwanted parts?

[beanz2]

I am using an 80 series ABS master in my 75 series. Like simkell said, the ABS mechanism is not built into the master, unlike in the 100 series. I even use the front port for the front braking circuit and the rear port for the rear, not reversed as in the ABS 80.

Dave