Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hope you're not in a hurry for genuine parts!?
Moderator: Tiny
Hope you're not in a hurry for genuine parts!?
After consulting the SA dealer listing on www.daihatsu.com.au I rang the nearest listed Toyota dealer for a price on some parts.
The guys response was "Do we sell Daihatsu parts?! No, I'm sorry we don't and I'm not sure when we will be."
The only place he could suggest that sells Daihatsu parts is way over the other side of town. I've sent a suitable Email to the Daihatsu Australia website's "contact us" link (which probably goes nowhere! )
The guys response was "Do we sell Daihatsu parts?! No, I'm sorry we don't and I'm not sure when we will be."
The only place he could suggest that sells Daihatsu parts is way over the other side of town. I've sent a suitable Email to the Daihatsu Australia website's "contact us" link (which probably goes nowhere! )
David
Not a great sign for the future - however everything I have ever needed for my F300 I have been able to source aftermarket so far with a few bits from the wreckers....
If its engine bits talk Applause, bearings seals etc just quote the number.
Am going to need tie rod ends soon so may change my opinion.
Toyota prommised to support Daihatsu owners through its dealers in its press release so lets hold them to it.
If its engine bits talk Applause, bearings seals etc just quote the number.
Am going to need tie rod ends soon so may change my opinion.
Toyota prommised to support Daihatsu owners through its dealers in its press release so lets hold them to it.
$10 bucks for a lousy nut?? go to bolt and nut shop! i rarely go for geniuse parts coz all part that is made, has the same purpose, no difference except for its quaility. i recently replace a water pump, didn't go to daihatsu as they want 168 bucks, went to a bearing and seal shop. got one for 75 bucks and ready to pick up 3 days later.
"My anti-drug is 4wd"
In my case I'm after the thermostat and a genuine one for a good reason (see my other post regarding thermostats from a couple of weeks back.)
A lot of stuff you simply won't get aftermarket either. As soon as you start looking for gearbox internals or the like then aftermarket is next to useless.
A lot of stuff you simply won't get aftermarket either. As soon as you start looking for gearbox internals or the like then aftermarket is next to useless.
David
like i said it's worth the risk. really it's up to you all how you want to maintance your roza. I chose this way coz it's cheaper. yeah for a gearbox i'd look for genuine. otherwise 2nd hand may be a possiblity which is rare today as everyone wants one.
For me, i take things as far as it can go. if it goes far enough or further that's good enough for me. If i can't find anything to fix it. i'd either switch to different car or mod up the roza with more common motor and gearbox which mean $$$$. It's up to you how you want to maintance your roza.
For me, i take things as far as it can go. if it goes far enough or further that's good enough for me. If i can't find anything to fix it. i'd either switch to different car or mod up the roza with more common motor and gearbox which mean $$$$. It's up to you how you want to maintance your roza.
"My anti-drug is 4wd"
Here's an automated reply I received after one week
The dealer I'd have to go to is way over the other side of the Adelaide too; I'd be guessing a two hour round trip!
and then this a day laterThank you for your internet enquiry, received through the Daihatsu website.
We have received your e-mail and your enquiry has been forwarded to the
Daihatsu Customer Relations Centre which will contact you directly.
If you have any more queries please do not hesitate to contact this website
again.
Thanking you
Daihatsu Enquiries - Internet
It makes me wonder how things are going to be in the future? Particulalry if they can't even get their act together in a major city!?Dear David,
I have talked to our Regional Manager for South Australia to find out what is the situation with Northpoint Toyota being an ASO. It is "going" to be shortly but at this stage there is still some internal concerns to address so that they have access to the purchase of parts and warranty information. So at this stage CMI Daihatsu is still the only agent in Adelaide and they can be contacted on (08)8382 9000.
Regards Joshua
The dealer I'd have to go to is way over the other side of the Adelaide too; I'd be guessing a two hour round trip!
David
still plenty of daihatsu parts here in the uk - however have read that OE parts are currently 60% off from diahatsu - assuming they are winding up here too, but the new models sell well here so cant understand it?
the sportrak is not highly rated here (probably for vanity purposes and the fact that most people think its just korean crap!!!) - that means plenty of cheap 2nd handers.
aside from 'special' parts like gearbox - are there any standard parts that are a no no to buy from aftermarket sources??
atb
chris
the sportrak is not highly rated here (probably for vanity purposes and the fact that most people think its just korean crap!!!) - that means plenty of cheap 2nd handers.
aside from 'special' parts like gearbox - are there any standard parts that are a no no to buy from aftermarket sources??
atb
chris
1990 sportrak
1990 hilux surf 2.4td - for sale sadly!!
1990 hilux surf 2.4td - for sale sadly!!
Just an update on the genuine parts availability.
Now my gearbox is getting rebuilt some genuine parts are needed, so I told the mechanic about the closest Toyota dealer who is supposed to be able to get them (refer the first post.)
Apparently he rang the dealer and once again they claimed they could not get Daihatsu parts. He told them they ARE listed as a Daihatsu parts outlet and they WOULD be getting in the parts he wanted!!! Suddenly they were able to order the parts from Sydney for him....
So much for Toyota ensuring parts availability through their A***HOLE dealers! I think I'll lodge another complaint through the Daihatsu website...
Now my gearbox is getting rebuilt some genuine parts are needed, so I told the mechanic about the closest Toyota dealer who is supposed to be able to get them (refer the first post.)
Apparently he rang the dealer and once again they claimed they could not get Daihatsu parts. He told them they ARE listed as a Daihatsu parts outlet and they WOULD be getting in the parts he wanted!!! Suddenly they were able to order the parts from Sydney for him....
So much for Toyota ensuring parts availability through their A***HOLE dealers! I think I'll lodge another complaint through the Daihatsu website...
David
Let's see what reaction that gets! If anyone else is having spare parts problems then go to www.daihatsu.com.au and click on the "Contact Us" tab- fill it out and under Topic select "E-mail a Daihatsu Representative."To Whom It May Concern,
Back in April I raised my concerns about the lack of Daihatsu spare parts availability in northern Adelaide. Your website lists NorthPoint Toyota at Hillcrest as a servicing and spare parts centre, however they continually deny being able to source Daihatsu parts and show a distinct lack of interest in assisting.
My Feroza is currently getting a gearbox rebuild and the mechanic rang NorthPoint after parts this week. Of course once again Northpoint denied being a Daihatsu parts dealer; it was only after the mechanic told them they WOULD be getting the parts in that they were suddenly able to help.
My initial E-mail in April was because I was also refused Daihatsu parts from NorthPoint. I suggest somebody sorts out this issue ASAP - I will be attempting to order parts through them in the next couple of weeks and will take this matter a lot higher if they refuse to serve me.
Regards,
David xxxxxx.
Next I'll be contacting Toyota Australia. IIRC by law any manufacturer is required to support vehicles with parts for 10yrs?
David
I have been buying genuine Diahatsu parts from toyota dealers on and off for the past 10yrs. Mostly from the Bundy dealership and haven't had any major problems. Usualy have to wait about a week sometimes 2 but i can live with that.
However i recently orderd a lot of parts from a differant toyota deailership for my "overhaul" (detailed thread soon. watch this space) and once again a couple of weeks wait.
BUT the torsion bar dust covers i wanted, they told me there was nil stock in Australia and would take 3 MONTHS FROM JAPAN #$%&^*&%^.
I could swim over there and get it myself in 3 *(&^$% Months.
BTW i am still waiting................................
However i recently orderd a lot of parts from a differant toyota deailership for my "overhaul" (detailed thread soon. watch this space) and once again a couple of weeks wait.
BUT the torsion bar dust covers i wanted, they told me there was nil stock in Australia and would take 3 MONTHS FROM JAPAN #$%&^*&%^.
I could swim over there and get it myself in 3 *(&^$% Months.
BTW i am still waiting................................
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
My genuine radiator was "three months from Japan" too- ended up arriving about a month early.
In SA there are only about 4 Toyota dealers listed for the whole state!? Three are in the city / suburbs and one in the country IIRC. For me the closest listed dealer is a 30 minute round trip , but they're the ones who refuse to get Daihatsu parts . My next option is about a two hour round trip to a inner city dealer.
I've tried ringing a different close-by Toyota dealer once before and they said there was no way they could get Daihatsu bits.
In SA there are only about 4 Toyota dealers listed for the whole state!? Three are in the city / suburbs and one in the country IIRC. For me the closest listed dealer is a 30 minute round trip , but they're the ones who refuse to get Daihatsu parts . My next option is about a two hour round trip to a inner city dealer.
I've tried ringing a different close-by Toyota dealer once before and they said there was no way they could get Daihatsu bits.
David
In Adelaide I use to get my parts from Dave Potter Honda/Daihatsu on Brighton rd Glenelg. They would have to be the BEST spare parts dealers I have ever found. If they didn't know what bit I was talking about they'd fax me an exp view and get me to indicate the part. Prompt, friendly, efficient service. They even gave me a discount on some parts they couldn't believe the price of, when they came thro'... It was a sad day when they stopped being a Daihatsu Dealer.
Thankfully i'd manged to replace just about everything by the time this happened so it's effect wasn't as great.
The next place was Stillwell's out at regency park. Good service.
Then one day when I went out there, "Sorry we don't do Daihatsu anymore, try CMI in the city".
Have only got a few things from CMI so far, and have had no real problems. There on wright st in the city.
As far as the thermostat's go, I bought two factory ones for the rocky and had nothing but problems with them. They look quality but don't work well at all. It'd take them ages to first open from cold. The temp gauge would hit 2/3rds before they'd open and then drop back to 1/3 all of a sudden and stay there. A couple of really cold nights when i had the heater on the thermostat jammed shut and almost caused the engine to overheat. I noticed when I pulled them out that the rubber impregnated sealing plate had swelled and bubbled slightly. Ive heard of issues with tridon ones as well and there too expensive for the rocky ($60!!!). The last two ive had are Dayco ones (part no. DT37 i think?). There o.k. Not fantastic but o.k.
Cheers.
Thankfully i'd manged to replace just about everything by the time this happened so it's effect wasn't as great.
The next place was Stillwell's out at regency park. Good service.
Then one day when I went out there, "Sorry we don't do Daihatsu anymore, try CMI in the city".
Have only got a few things from CMI so far, and have had no real problems. There on wright st in the city.
As far as the thermostat's go, I bought two factory ones for the rocky and had nothing but problems with them. They look quality but don't work well at all. It'd take them ages to first open from cold. The temp gauge would hit 2/3rds before they'd open and then drop back to 1/3 all of a sudden and stay there. A couple of really cold nights when i had the heater on the thermostat jammed shut and almost caused the engine to overheat. I noticed when I pulled them out that the rubber impregnated sealing plate had swelled and bubbled slightly. Ive heard of issues with tridon ones as well and there too expensive for the rocky ($60!!!). The last two ive had are Dayco ones (part no. DT37 i think?). There o.k. Not fantastic but o.k.
Cheers.
If it doesn't have two sticks, I don't wana know about it!
Got a reply to my complaint:
On the Daihard forum an Applause owner said he'd had problems with Tridon thermostats and a Daihatsu expert told him genuine was the only way to go? I'll wait and see how I go once the weather warms up- it's been good during winter (nice warm heater for once! )
Hopefully theyve put a rocket up them and the service will improve!Dear David,
I have raised this concern to the highest levels in Daihatsu and the dealership. We thank you again for this feedback and if the dealership continues to not perform for our customers we will take appropriate internal steps regarding this concern.
Regards
Joshua Smith
Daihatsu Customer Relations
On the Daihard forum an Applause owner said he'd had problems with Tridon thermostats and a Daihatsu expert told him genuine was the only way to go? I'll wait and see how I go once the weather warms up- it's been good during winter (nice warm heater for once! )
David
its always best to get a price on original equipment as you would be suprised on the price. I had to replace the clutch in mine and rang up after market and got quoted over $300 supply only for a standard replacement and when i called the toyota/daihatsu dealer i got one for $85 . and they had it in stock. so i dought it on the spot. They had a special on "instock parts" 50% off so they could clear some warehouse space for the toyota parts.
i also got tail light lenses, clutch cable, handbrake cable and engine mounts and they were cheaper as OE and they wern't on special.
most times i will get after market but it pays to get a OE price first.
i also got tail light lenses, clutch cable, handbrake cable and engine mounts and they were cheaper as OE and they wern't on special.
most times i will get after market but it pays to get a OE price first.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
Just on the thermostat issue .... I had a problem with hot running temperature when in the bush or sand on stockton beach (quite soft )
During winter road driving my temp used to sit just above half way and close to four fifths .when on the beach or bush driving in low.
I had my mechanic drill 5 holes evenly spaced around the outer edge of the new thermostat and now it runs all day on the beach without going over half , same in the bush even on long low range rocky hills.
On the road now it never goes more than a quarter when under normal load and 1 third when i am giving it a bootfull for 10 minutes or more.
It does however take about 3 minutes longer to get it warmed up in the cold winter mornings.
The Bush Buster
During winter road driving my temp used to sit just above half way and close to four fifths .when on the beach or bush driving in low.
I had my mechanic drill 5 holes evenly spaced around the outer edge of the new thermostat and now it runs all day on the beach without going over half , same in the bush even on long low range rocky hills.
On the road now it never goes more than a quarter when under normal load and 1 third when i am giving it a bootfull for 10 minutes or more.
It does however take about 3 minutes longer to get it warmed up in the cold winter mornings.
The Bush Buster
92 Feroza Widetrack
2" lift
extractors 2" exhaust
custom snorkel
Imported Motor
Bunnings flares
You can follow me..... But it's gonna HURT !!!
2" lift
extractors 2" exhaust
custom snorkel
Imported Motor
Bunnings flares
You can follow me..... But it's gonna HURT !!!
IMHO it the bad design of the cooling system that's to blame.
I've never had a car before where the thermostat is in the lower radiator hose (ie. the one returning cold coolant.) The engine temp gauge is up the other end in the outlet where the hot engine coolant flows out to the radiator.
My theory is, the engine gets hots , so the thermostat will start to open. What happens next? It gets a rush of cold coolant over it from the radiator and starts to close again..... Meanwhile the engine temp gauge is reading the outlet from the top of the engine and doesn't register much of a change while this is happening. The thermostat should be up in the top outlet where it will get the hot coolant from the engine flowing over it BEFORE the coolant gets cooled by the radiator.
That's my theory anyway!
I've never had a car before where the thermostat is in the lower radiator hose (ie. the one returning cold coolant.) The engine temp gauge is up the other end in the outlet where the hot engine coolant flows out to the radiator.
My theory is, the engine gets hots , so the thermostat will start to open. What happens next? It gets a rush of cold coolant over it from the radiator and starts to close again..... Meanwhile the engine temp gauge is reading the outlet from the top of the engine and doesn't register much of a change while this is happening. The thermostat should be up in the top outlet where it will get the hot coolant from the engine flowing over it BEFORE the coolant gets cooled by the radiator.
That's my theory anyway!
David
Have to agree re the cooling system - its a strange design.
When fitting my thermo fan I had the top of the engine over hot but the bottom hose cold - all with a simple misadjustment of the fan cut in point.
When I find an appropriate in line thermostat will modify the top discharge pipe to suit. In fact this is probably a topic for a seperate post...
When fitting my thermo fan I had the top of the engine over hot but the bottom hose cold - all with a simple misadjustment of the fan cut in point.
When I find an appropriate in line thermostat will modify the top discharge pipe to suit. In fact this is probably a topic for a seperate post...
Who is online
Users browsing this forum: No registered users and 2 guests