The main power cable for my winch is currently about 1 metre long.
I am setting up a dual battery system and have no room under the bonnet for the 2nd battery. So it looks like it has to go out the back either under/on top of the tray.
This would mean that the new power cable would be about 5-6 mtrs long. Would the amount of Amp droppage be severe enough to affect the winch?..and if so...how do I get around the problem?
Is it simply a case of bigger cable?...how big is big enough?...Have heard of blokes just running 2 cables...but that seems a little dodge to me.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
amp drop rate
Moderator: -Scott-
amp drop rate
L.S Canvas & P.V.C
www.lscanvas.com.au
www.lscanvas.com.au
Which is roughly a 10mm core. Pretty heavy stuff.84ZOOKSTA wrote:70mm2.
I agree with MickyD that it's not dodgy to run two cables, but I am just wondering why not run the winch from the battery that's in the engine bay?
If you really want to use one battery for starting and the other for winching, you will have less trouble running the starter motor from the battery that's in the back.
This is not legal advice.
sorry to scare ya dude...........G_loomis wrote:70mm cable....as in 70mm diameter?mickyd555 wrote:run two cables in parralell. its not dodge, its quite good. What is the caurrent rating on the existing winch?
what size cable have you used from the existing battery.
At a guess id say run 2 x 70mm cables
70mm squared cable shoule be good for about 220 Amps (without looking in the book??) im guessing the winch will be rated at about 350 amps, and then take voltage drop into account.........it sounds right. I can work it out for you exactly tomorow when i get to work if ya want, but i will need the proper rating of the winch.
if you go down a size in cable your looking at 50mm squared cable then and i think you will only get about 150 amps out of that.....again i cant remember exactly, but at 150 per core your still only looking at 300 amps....not to mention price difference would be negligible on a 10m length, especially if you can get a nice electrician member of OL to help you out.
now that ive typed all that maybe you might need 95mm cable
Where and how much for 70mm2 cable.
Wholesalers have 35mm2 flex and i can get that fairly cheap, i will be running both my batteries in the back to reduce the weight over the front, but need find cable and know the current rating of it. Really should do some maximum demand/volt drop calculations but its just easier to ask
Wholesalers have 35mm2 flex and i can get that fairly cheap, i will be running both my batteries in the back to reduce the weight over the front, but need find cable and know the current rating of it. Really should do some maximum demand/volt drop calculations but its just easier to ask
run 3 x 35's then, 35 should get you 120 amps i think?? but you will have to see how it goes on price when you need 3 times as much..6.5 rangie wrote:Where and how much for 70mm2 cable.
Wholesalers have 35mm2 flex and i can get that fairly cheap, i will be running both my batteries in the back to reduce the weight over the front, but need find cable and know the current rating of it. Really should do some maximum demand/volt drop calculations but its just easier to ask
Mount the winch under the tray comp style. Right next to the battery. So your long cable only needs to be large enough to deal with charge current.
Considering the front mount: all the above discussion only deals with current rating, and the ability to sustain the winch current for long duration. It's not considering voltage drop, which I expect to be considerable under full load. I expect 350A will create quite a voltage drop over a 6 m run , so the winch motor won't actually receive 12V, so it won't actually draw 350A, and you'll never achieve peak performance.
Anybody want to do the sums?
Scott
Considering the front mount: all the above discussion only deals with current rating, and the ability to sustain the winch current for long duration. It's not considering voltage drop, which I expect to be considerable under full load. I expect 350A will create quite a voltage drop over a 6 m run , so the winch motor won't actually receive 12V, so it won't actually draw 350A, and you'll never achieve peak performance.
Anybody want to do the sums?
Scott
nope, thats why i didnt...........NJ SWB wrote:Mount the winch under the tray comp style. Right next to the battery. So your long cable only needs to be large enough to deal with charge current.
Considering the front mount: all the above discussion only deals with current rating, and the ability to sustain the winch current for long duration. It's not considering voltage drop, which I expect to be considerable under full load. I expect 350A will create quite a voltage drop over a 6 m run , so the winch motor won't actually receive 12V, so it won't actually draw 350A, and you'll never achieve peak performance.
Anybody want to do the sums?
Scott
Its Sunday, ill do it tomorow and post it up.........
http://www.stealth316.com/2-wire-resistance.htm
should give you a ballpark figure
0.7V drop at 350A, 6m, 0 AWG (53.4mm2)
should give you a ballpark figure
0.7V drop at 350A, 6m, 0 AWG (53.4mm2)
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Who is online
Users browsing this forum: No registered users and 0 guests