Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hi there, Picked up my new beast today a 1976 Rangie ... (yes that was '76 by the way not '86 or even '96) but it has a P76 4.4 in it on LPG.
All Good. Except the holley carby and the lpg setup sticks the air cleaner through the bonnet where they have placed a 'nice' letterbox setup. I can fix all that with a body lift but I still want to run a snorkel off it preferably with a sort of 3 inch adaptor elbow off the top of the carby and a std rangie canister style filter- it must have been done before. I'd just like to know how and see pics if possible.
its basically a ring that sits underneath the diaphragm in the mixer the easiest way to describe it would be to say its a mini airbox without a filter and forces the air into the carb... the pictures say 1000 words however.
Although not into a rover motor on gas, I run dual snorkels, each into modified 3.5 airboxes, then into the motor.
heres some pics, ignore the mess, nowhere near finnished but you get the picture
Damien
You do not have the required permissions to view the files attached to this post.
Last edited by 6.5 rangie on Sun May 14, 2006 12:52 pm, edited 1 time in total.
but she no leak!!!
but thats a different story.