Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

aircon not working - TD42 Patrol

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 35
Joined: Mon May 10, 2004 9:54 pm
Location: Bunbury, West Oz.

aircon not working - TD42 Patrol

Post by BlownTrol »

has anyone got a copy of the wiring diagram that covers the aircon system for a td42?????

be very appreciated if you could post it or a link please????
Administrator
Perth4x4.net.

there is no replacement for displacement.
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Have a look through these (not sure if the aircon is in there?)

http://www.users.on.net/~murcod/patrol/TD42%20wiring/
David
Posts: 35
Joined: Mon May 10, 2004 9:54 pm
Location: Bunbury, West Oz.

Post by BlownTrol »

yeah mate have had a look thru all of them, and there is nothing on the a/c wiring at all, was hoping someone else has a copy????
Administrator
Perth4x4.net.

there is no replacement for displacement.
Posts: 292
Joined: Sat Apr 29, 2006 2:32 pm
Location: New Zealand

Post by David_S »

I have got an AC wiring diagram for a P40 MQ Patrol which might help a bit - I doubt that the principles have changed a lot. I pulled mine apart last year to get at the micro switches and replace the main relay. Quite a fiddle as it was all tucked up under the dash and behind the glove box which I had to remove. I don't think I have permissions to post a picture so if you want me to email a copy leave me a message. I modified the micro switches whilst I had it apart by introducing a bypass switch so that I could run the AC in the demist positon. Improved defogging enormously.

David
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
Posts: 292
Joined: Sat Apr 29, 2006 2:32 pm
Location: New Zealand

Post by David_S »

I will try and post the picture of the wiring diagram

David
You do not have the required permissions to view the files attached to this post.
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
Posts: 35
Joined: Mon May 10, 2004 9:54 pm
Location: Bunbury, West Oz.

Post by BlownTrol »

cheers mate
Administrator
Perth4x4.net.

there is no replacement for displacement.
Posts: 192
Joined: Tue Dec 20, 2005 1:37 pm
Location: Brisbane

Post by spannercrab »

Most 'trols (Y60) came out with after market (cooltemp) a/c ... so factory diagrams don't cover it ... pretty standard on any vehicle.

Fans & Compressor connected to a/c button via pressure switch and low temp (evap) thermostat & speed selector knob ...
If it's worth doing - it's worth doing to excess ...
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests