i have installed the alarm in the GU, and have 3 imobilisers to conect.
i have put one on the ignition and have the other two to do still.
any ideas on what to imobilise?
i ususally do fuel pump,starter motor and ignition.
anyone done anything different on a GU? maybe the computer?
i dont want to cut any wires to the computer before i know what it is.
also does anyone know what colour wire the fuel pump is and where it is? does it run down the drivers side?
any other ideas?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
what to imobilise?
Moderator: -Scott-
what to imobilise?
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
What fuel is it running. Auto or manual. Starter, crank sensor, fuel pump, ecu power, Never do main ignition at the key. Can also do factory key reader wires. Be care using test light to. try a probe. Try some fues too. start car then remove. NOT AIRBAG ONES. For the best result immobolize at different part of the car. Makes it harder to bypass.
Rob
The strathfield Group.
Rob
The strathfield Group.
http://vic.suzuki4wd.com/forum/index.php
www.jimny.se
www.jimny.se
Who is online
Users browsing this forum: No registered users and 0 guests