Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ally extrusion for rhino racks - where to get ??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 88
Joined: Tue Nov 23, 2004 10:57 am
Location: melbourne

ally extrusion for rhino racks - where to get ??

Post by bradley »

hi all, just a quick one;

i am looking to make up some custom add-ons for my rhino racks (tradesman) and also some custom racks in the rear of the jack, i would like to use the same square section tube that they use with the captive nut relief in them, so i can keep uniformity with the add-on eyelets and brackets etc.

Does anyone know if this is available as raw stock, or is it an "exclusive extrusion"

cheers all, Brad.
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

Unistrut is the manufacture.
call them.
I use the stuff at work all the time but in steel.
Burnsy
Top
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

Yeh, I use the unistrut for work too, but again only is steel, noy in aluminium. Try builders supplies or electrical supplies wholesalers.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Top
Posts: 292
Joined: Mon Jan 20, 2003 5:43 pm
Location: Liverpool NSW

Post by Charlie »

I'm sure you could order it if you visit a rhino stockist, there is a much larger dealer catalogue of parts available than what’s listed on the rhino website
Top
Posts: 262
Joined: Sat Mar 05, 2005 12:32 pm
Location: King Island

Post by kempster1 »

It is the same profile as unistrut because unistrut make it
http://www.tycoflowcontrol.com.au/unist ... ts/suparax
You can get unistrut in galv steel and aluminium.
http://www.tycoflowcontrol.com.au/unist ... al_framing
Top
Posts: 88
Joined: Tue Nov 23, 2004 10:57 am
Location: melbourne

Post by bradley »

awesome, thanks guys i will check them out.

Geez problem now is i have seen its available in stainless :lol:

oh the descisions :D
Top
Posts: 217
Joined: Thu Jan 13, 2005 12:01 pm
Location: East BrisVegas

Post by V6XtraHilux »

I got 2 lengths of stainless steel unistrut for the back of my tray, cost me, sorry, cost my subbie, about $500 for the two lengths!!

the joys of working with sub-contractors! :cool:
03 V6 Xtra Cab Hilux F&R Lockers 4' BL/susp 33' BFG MTs sliders ARB bullbar IPFs-workn 4 SAS$$
Top
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Post by AFeral »

oops
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests