Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

idle air valve - disconecting

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 264
Joined: Tue Aug 31, 2004 4:57 pm
Location: New Zealand

Contact:
Contact Rotazuk

idle air valve - disconecting

Post by Rotazuk »

Hi
I am getting back into setting up the megasquirt in the rangie and after having my laptop stolen and am after an easy way out to block the idle air valve , if I need to . Either powering it closed or just planking it off . Anyone done this before and have an easy way .

Cheers

Chris

91 3.9 v8 .
Top
Posts: 95
Joined: Mon Oct 10, 2005 11:38 am
Location: Brisbane, Sumner Park

Post by fnukle »

can u pull it out and weld the bottom of it?
or use an exhaust sealant to plug it up?
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

find a bolt that fits and use that or you can unplug it before start it should be wound pretty well out - there are procedures on the net on how to wind it all the way in or out

Tom
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest